Replacement 72" Trailer Fender for Tandem Axle Tilt Bed Trailer

Question

Question:

6 foot fender for dual axle car tilt trailer Texas trailer 14-15 inch wheels

asked by: Jason

0

Expert Reply:

We have two different styles of bolt/weld on fenders that will work great for your trailer. We have Tandem Axle Teardrop Trailer Fender # HP24VR or the standard Tandem Axle Trailer Fender # HP84VR.

Both of these replacement fenders are designed to fit tandem axle trailers with 14" and 15" wheels. They measure 72" long which is what you currently have. I like the look of # HP24VR more because it has a more finished look.

expert reply by: Jacob H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 3

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 4

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 5

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

Answer 6

When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer; replacing them with longer straps will result in additional play in your trailer suspension which could lead to additional wear…

view full answer...

Answer 7

The side plates of the B&W gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail of your 2004 Dodge 2500 8-foot bed. See the B&W video I included at the 7 min and 30 second mark. If your Firestone air bags like…

view full answer...

Answer 8

Your air bag mounting location will determine compatibility with the Gooseneck trailer hitch #BWGNRK1313. The side plates of the gooseneck trailer hitch #BWGNRK1313 will mount on the outside of each frame rail. See diagram to the right and video…

view full answer...

Answer 9

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 10

I took a look at the Bargman Door Latch 10-30-051 that you referenced and it is indeed oversized. The best option we have to replace this would be the Global Link RV Entry Door Locking Latch Kit part #295-000019 which can install in an opening up to…

view full answer...

Answer 11

The Tandem Axle Trailer Fenders - Double Radius - Steel - 14" to 15" Wheels - Qty 2 #HP94VR are 65" long x 9" wide x 15" tall and they are designed to work with 33 to 35 inch on center axle spacing.

view full answer...

Answer 12

A single spare tire mounted in your trailer will not have too much effect on tongue weight but if your application means installing multiple E-Track spare tire holders #RA-16HST then you will want to try to distribute the load evenly if possible. For…

view full answer...

Replacement 72" Trailer Fender for Tandem Axle Tilt Bed Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching