Hitch-Mounted Cargo Carrier With Complete Trailer Light Kit And Wiring
Question:
Hello, can you advise? I need to be ready to go in 2 weeks. I want to buy the e98872 carrier rigged with lights 47-06-404, 40-06-020, BK70BB. I need to confirm the light assembly above works and I need the complete wiring harness for the lights. Also, does the e98944 work as a license plate mount? Thank you.
asked by: Mark T
Expert Reply:
The 24x62 etrailer Cargo Carrier e98872 is an excellent option for a folding cargo carrier and has a 500lb weight capacity. Bargman LED Trailer Tail Light - Stop, Tail, Turn # 47-06-404, Rubber Grommet # a70gb, and Trailer Light Mounting Bracket # BK70BB will all work well together. For the wiring you will need Replacement Pigtail - 3 Wire Sealed # 40-00-003 which will plug into the tail lights and then you will need 20 Ft 4-Way Trailer Wiring Harness # A20WB to connect the tail light pigtail harnesses to the 4 way plug at the back of your vehicle.
The etrailer License Plate Mounting Brackets # e98944 will not work with this cargo carrier since the carrier's rails are not thick enough. This plate bracket is made for 3/4" square tubing. Another thing to keep in mind is that the Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights # BK70BB is designed to be mounted on top of the support rail on a cargo carrier that has square tubing; you couldn't do that with this cargo carrier since the top rails are too thin and are not a flat mounting surface. If you wanted to, you could mount the light bracket underneath the cargo carrier.
If you wanted a cargo carrier that WOULD work with the light bracket being mounted on the top and would allow the license plate bracket to be installed I recommend going with 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs # e98874. I have attached demonstration videos for these products along with a 4 way wiring pinout diagram. If you do not have a trailer hitch receiver or a 4 way connector at the back of your vehicle then feel free to give me your vehicle's year, make, and model and I will find a setup for you.
Products Referenced in This Question
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 6-1/2 Inch Long
- Oval
- Optronics
more information >
Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 6-1/2 Inch Diameter
- Brackets
- Black
- Optronics
more information >
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Tilting Carrier
- Folding Carrier
- 24 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 60 Inch Long
- Class III
- Class IV
- Steel
- etrailer
more information >
etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier
- Accessories and Parts
- Hitch Cargo Carrier
- License Plate Brackets
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Review of Demco Replacement Kar Kaddy Tail Light - DM45MV
- Shop: Three-Wire Straight Pigtail for Optronics Weatherproof Stop/Turn/Tail
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Weathertight Plug - Red Lens
- Shop: Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diodes - Round - Red Lens
- Shop: Replacement 4" Round Tail Light for Demco Kar Kaddy Tow Dolly - Qty 1
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead