Compatibility of CAM-Locks and Thule Boxes

Question

Question:

Would like to know compatibility of CAM-Lock and key variations with Thule car rooftop box. Thanks

asked by: Dc

0

Expert Reply:

The CAM-Lock cores like part # CTC-CAMLOCK-18M-2874 are designed for the Trunx Rooftop Cargo Box, part # TRX34FR. As such, I cannot say if they will work with your Thule box or not.

Thule has their own line of lock cores for their products. If you let me know which Thule core you have or which cargo box you have, I can help you find the correct replacement core and key.

expert reply by: Kef G

0

Answer 1

I spoke with my contact at Thule just to be sure we could recommend the correct hardware for your 2002 Excursion cargo box. He said that the original replacement hardware is the Replacement Quick Mount Hardware Kit, #TH04997. The EasySnap TH05820 you…

view full answer...

Answer 2

The correct replacement mounting hardware and bracket kit for the Thule Mountaineer 669 is the Replacement QM3 part #TH04997. Unfortunately, we only offer the replacement brackets and bolts sold in a kit but the similar #TH04973 is compatible.

view full answer...

Answer 3

If you cannot make out the number stamped into the face of the lock, your best bet would be to have a locksmith pick the lock for you. Once it's unlocked, you can use a replacement lock core, like the one included with part #TH450200 to replace…

view full answer...

Answer 4

Is the actual lock housing missing or just the lock core that fits in it? Because if it is the housing then that part is not available as a replacement part. But if it is just the lock core then you can get #TH450200 which comes with 2 lock cores, 2…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Since you are needing a replacement lock as well as the key, you can use the Replacement Lock Core and Key #SR03807 for your Sears X-Cargo Sport 20 cargo box.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Compatibility of CAM-Locks and Thule Boxes

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching