Is Motorcycle Carrier Made in USA

Question

Question:

Made in u.s.a.?

asked by: James M

0

Expert Reply:

The etrailer Motorcycle Carrier, along with the rest of the motorcycle carriers we offer, are made overseas:

- etrailer Motorcycle Carrier with Ramp for 2" Hitch # e98873

- Ultra-Fab Dirt Bike Carrier for 2" Hitches # UF48-979033

I have added links below to video reviews of each of them if you'd like to take a look.

expert reply by: Kyle S

0

Answer 1

The reason that some hitch-mounted accessory items, whether a motorcycle, cargo or bicycle carrier, cannot be used on the rear of an RV or trailer has to do with stress forces on the rack. With most RVs there will be a greater distance from the rear…

view full answer...

Answer 2

The Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 80" Long - 500 lbs #UF48-979033 can be mounted to the front of a 24V View Motorhome as long as the front mounted hitch is able to handle the vertical load weight of the Honda…

view full answer...

Answer 3

It looks like a Vespa 150cc weighs around 245-lbs and has a wheel base of around 4-1/2" feet, so you can use the Ultra-Fab Dirt Bike Carrier for 2" Hitches #UF48-979033. This carrier has a 500-lb weight capacity and includes a 39-inch ramp…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 8

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

view full answer...

Answer 9

Yes, the B and W Companion Slider Hitch part #BWRVK3370 does fit the OEM prep kit of a 2021 Ford F-250 Super Duty. Newer trucks do sit up higher but so do the newer fifth wheel trailers to compensate for that so as long as the truck doesn't have…

view full answer...

Answer 10

For your application you need the Air Lift LoadLifter 5000 which has that 5,000 lb weight capacity you mentioned. Please note that suspension enhancement is designed to help the OEM suspension on your 2021 Ford F-250 and won't increase the weight…

view full answer...

Answer 11

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...