Can Adarac Pro Series Ladder Rack Fit with Bak MX4 Tonneau of 2021 GMC Sierra 1500

Question

Question:

Will the Adarac pro series ladder rack work with the Bak MX4 tonneau on a 2021 GMC Sierra AT4

asked by: Mike L

0

Expert Reply:

Yes the Adarac Pro Series Ladder Racks can fit with the Bak MX4 tonneau cover of your 2021 GMC Sierra 1500. Since I don't know your bed length you'd want the following combinations of the two based on bed length.

8 ft bed you'd want ladder rack part # A4003886 with tonneau # BAK448132
6-1/2 ft bed you'd want ladder rack # A4003497 with tonneau # BAK448131
5-3/4 ft bed you'd want ladder rack # A4002965 with tonneau # BAK52FR

expert reply by: Jameson C

0

Answer 1

There are some special instructions for installing the Adarac Pro Ladder Rack #A4000963 in the rear stake pockets of your 2017 Chevy Silverado 1500. I have attached some clips of these instructions for you to check out. You will use the included…

view full answer...

Answer 2

Yes, the Adarac Pro Series Custom Truck Bed Ladder Rack part #A4000964 will work with the BAKFlip MX4 Hard Tonneau Cover part #BAK48329 on a 2020 Ford F-150 5-1/2' Bed. In fact, it is the only ladder rack which will allow for full unimpeded use.…

view full answer...

Answer 3

I believe you are wanting to install a truck bed roof rack on your 2021 Ford F-150 short bed while keeping your Bakflip tonneau cover installed. If so, then you will want to go with a different rack as the Yakima system you currently have is not made…

view full answer...

Answer 4

For your 2015 Ford F-250, the BAKFlip folding hard tonneau covers will work well and there are 4 options to choose from. There is the BAKFlip G2 Hard Tonneau Cover #BAK26310, FiberMax #BAK126310, F1 #BAK72310, or MX4 #BAK48310. Each of these options…

view full answer...

Answer 5

The only ladder rack that will work on your 2018 Ram 1500 with the BAKFlip MX4 Hard Tonneau Cover #BAK48203 is the Adarac Pro Series Custom Truck Bed Ladder Rack #A4000944. This ladder rack mounts in the stake pocket holes and it has vertical…

view full answer...

Answer 6

The Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500lbs #A70450 mounts in the stake pockets of your 2020 Ford F-250's bedrails so it will be compatible with tonneau covers that mount on the inside of the bedrails like…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...