SnowBear Plow Mount for 2015 Jeep Wrangler and 2-Point Plow

Question

Question:

can you tell me if the 397-101 will work with my 2015 jeep wrangler sport ? will my crossmember work? should i get a front receiver hitch and retrofit bar ? I will include pics of my older snowbear plow , and brackets, I tried to email and call snowbear with no response ? thanks for helping out

asked by: Dan C

1

Helpful Expert Reply:

The SnowBear mounting bracket kit part # SB397-101 is the correct fit for your 2015 Jeep Wrangler and also is the correct 2-point design that your plow would need as well so this would be exactly what you'd need.

expert reply by: Jameson C

1

Customer Snowbear Plow 2-Point
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

Answer 3

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 4

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

view full answer...

Answer 5

In order to add a 7 way connector on you 2020 Jeep Wrangler JL you'll need to start by adding a 4 way trailer connector like the Tekonsha #118786, which gives you the connections needed to install a 7 way connector. Once you've installed the…

view full answer...

Answer 6

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 7

There are a couple choices for you that will be based on the bumper you have. Blue Ox Aftermarket Bumper Adapter #BX88358 -Bumper tab thickness: 3/4", 7/8", and 1" -Pin Hole diameter: 1" Blue Ox Aftermarket Bumper Adapter #BX88357…

view full answer...

SnowBear Plow Mount for 2015 Jeep Wrangler and 2-Point Plow

Product Page this Question was Asked From

Continue Researching