Recommended Running Boards To Replace Narrow OEM Steps On 2020 Toyota 4Runner

Question

Question:

Will this kit 27-1945 work on Toyota steps? The 4runner is 2020 and has Toyota steps that are just to short and to close to the body. No room at all to place a foot on the step and use it. Thanks

asked by: Leonard P

0

Expert Reply:

I have a replacement option for you, but the Westin Custom Installation Kit # 27-1945 is designed for the Westin Molded, Sure-Grip, and Grate Step Running Boards and will not work with the OEM steps on your 2020 Toyota 4Runner.

Instead I recommend replacing your steps with the Westin Sure-Grip Running Boards w/ Custom Installation Kit - 6" Wide in Black # 27-6125-2165 or Brushed Aluminum # 27-6120-2165 if your 4Runner is a TRD or SR5 model.

If your 4Runner is a Limited model, you would use the Black # 27-6125-1945, or Brushed Aluminum # 27-6120-1945.

These 6" wide steps will give you the additional space for your feet that you are looking for, and each of the kits mentioned include a custom installation kit that does not require drilling to install.

I included a video of the Westin Running Boards for you to take a look at

expert reply by: Samuel C

0

Answer 1

The molded panel on the 2012 Toyota 4Runner is standard with the trim package of the Limited 4Runner. The boards available that fit the Limited will fit below that panel in your photos. I recommend to use the Westin Sure-Grip Running Boards w/ Custom…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Recommended Running Boards To Replace Narrow OEM Steps On 2020 Toyota 4Runner

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching