2.5 inch Weight Distribution Shank for Blue Ox Weight Distribution with 9 Adjustment Holes

Question

Question:

Hello, does blue ox make a 9 hole 2.5inch shank that will work with bxw 1351

asked by: Aaron B

0

Expert Reply:

Yes Blue Ox does make a weight distribution shank for a 2-1/2 inch hitch with 9 holes of adjustment with the part # BLU26FR.

This will work great with the system you mentioned part number # BLU59FR.

expert reply by: Jameson C

0

Answer 1

On a towing setup you are always limited by the lowest rated component as the overall towing capacity since that is the weakest point. When it comes to trailer tires you always want to have them inflated to their max psi when cold. Not only do you…

view full answer...

Answer 2

It sounds like what you are saying is that when you upgraded to the bigger 2019 Ram 2500 that your receiver was too high on the taller truck and now when you connect to your 2018 Keystone Cougar Trailer the coupler is too low. It sounds like you need…

view full answer...

Answer 3

When it comes to switching out your Reese distribution shank to a bigger one I would recommend going to The Blue Ox SwayPro Weight Distribution Shank for 2-1/2 inch Hitch - 9 inch Long - 9 Hole Adjustment #BXW4028. It is very similar to The Blue Ox…

view full answer...

Answer 4

The #BXW1000 Blue Ox SwayPro Weight Distribution System you mentioned is protected by a Limited Lifetime Warranty against manufacturing defects.

view full answer...

Answer 5

Since you have the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches - 9" Long - 7 Hole Adjustment #BXW4000 and are still nose high, I would normally recommend the Blue Ox SwayPro Weight Distribution Shank for 2" Hitches -…

view full answer...

Answer 6

It's hard to say if you'll need more drop than what the shank you have provides. Is the newer truck taller? If the truck sits at the same height you would be fine without needing additional drop. I attached a help article that details how to…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Is your 2017 Airstream Flying Cloud equipped with a Blue Ox Sway Pro Weight Distribution System? We do not have a way to look up a model of camper in order to know exactly what parts are needed, but from what I can see online it looks like your…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

2.5 inch Weight Distribution Shank for Blue Ox Weight Distribution with 9 Adjustment Holes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching