Will the Saris Freedom Bike Rack Work On a Espin Flow Step Through E-bike

Question

Question:

Will it work with Espin Flow step through ebike? I have 2 of them. They have integrated batteries in frame. Will use with Toyota Tundra with 2 hitch.

asked by: Tom

0

Expert Reply:

The Saris Freedom Bike Rack part # SA4412B will fit a frame with up to 5" diameter. If the frame exceeds this you'd need an adapter bar, the Saris Bike Beam Bike Frame Adapter Bar part # SA3040. The Saris Freedom will be your best option for the larger frame size.

expert reply by: Conner L

0

click to enlarge

Answer 1

The Saris bike rack part #SA4412B weighs 22.5 lbs and has a weight capacity of 60 lbs per bike so while you'd be cutting it kind of close you'd be totally safe to use this in your hitch that has a 1-1/4 inch opening.

view full answer...

Answer 2

I do not have a photo of a Specialized Turbo Como 3.0 step through e-bike on the Saris Freedom Bike Rack for 2 Fat Bikes #SA4412B-FB. But I have included a video that demonstrates how to operate the bike rack. In the video, you can see that the…

view full answer...

Answer 3

The Saris Freedom 2 Bike Platform Rack part #SA4412B would be a perfect option for a Specialized Turbo Vado 4.0 E-Bike. The tire size, fenders, weight, rear rack, and frame construction should not be a problem. I however recommend using the frame…

view full answer...

Answer 4

Thank you for your continued patronage. We greatly appreciate it! There are options for 60 pound bikes that hold the bikes at the frame and that have a center mast that folds down. Saris Freedom #SA4412B rated for 60 pounds per bike, center folds…

view full answer...

Answer 5

Curt used to require the stabilization strap part #18050 when using a bike rack or accessory on their Class I hitches. However, they have since said the stabilization strap is not required when carrying an accessory on their Class I hitches. It…

view full answer...

Answer 6

The up and down play that you are experiencing is due to the tolerances that different manufacturers must allow to be sure that all accessories will work in conjunction with each other. In this case the hitch and bike rack are compatible but there is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Answer 9

I have the perfect bike rack for your Electra Townie and for this I recommend the Saris Freedom 2 Bike Platform Rack part #SA4412B. The reason I recommend this bike rack over the Malone rack is because you don't need to use an adapter bar at all.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Will the Saris Freedom Bike Rack Work On a Espin Flow Step Through E-bike

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching