Recommended Bump Stop Replacement Suspension Enhancement for 2020 Ram 1500 New Body

Question

Question:

Checking to see which suspension enhancement bump stops I would need for a 2020 ram 1500 new body style crew cab 4wd

asked by: Kyle A

0

Expert Reply:

Due to the better ride quality they'd provide, I'd recommend the SumoSprings Solo, part # SSR-307-47 over the Timbren # TDR1500DQ springs you'd looked at.

The SumoSprings offer up to 1500 lbs of additional support, and will help level, absorb bumps and minimize sway and body roll during turns. The springs offer progressive load control, which means that the more weight that's applied, the stiffer they become. This means that you'll still have a comfortable ride under light or no loads and the support you need when towing or hauling cargo in your truck bed.

I've linked to an installation video that you might find helpful.

expert reply by: Mike L

0

Answer 1

If you are looking for a replacement bump stop for your 2017 Ram 1500 with air suspension only a Ram dealer would be able to help. If you wanted a suspension enhancement kit similar that would provide additional rear suspension support we have the…

view full answer...

Answer 2

You can rotate the whole trailer jack, such as #LC285318 or another A-frame mount jack, by unbolting it from the trailer, turning it, and bolting it back on. You would not be able to rotate just the head by itself.

view full answer...

Answer 3

For your 2021 Ram 1500 Classic, the better option for your suspension enhancement between the Timbrens and SumoSprings is definitely going to be the SumoSprings, with the correct fit for your truck being the following part number: - SumoSprings…

view full answer...

Answer 4

In the instructions that I have linked for you, under Figure B it states the recommended operating pressures for Firestone air springs #F4174 are from 5 psi to 35 psi. So 35 psi is the max you will want to put in the bag in this system. In step 9…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Recommended Bump Stop Replacement Suspension Enhancement for 2020 Ram 1500 New Body

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching