Swivel Jack Replacement For Dutton Lainson Boat Jack
Question:
The jack on my 2000 boat trailer lost the guts somewhere between the lake and my house. The Jack that is on it is best guess 1999 or 2000, date stamp is 5399 but the first two are supposed to be the week and second two the year, Dutton Lainson. The boat it came with was a 2000 ProCraft. Best model I can find is 203871B. Its listed on the jack as an 800 pound Trailer Tongue Jack. It is a swivel jack with the welded on bracket. The hole on the jack bracket is approximately 2.5 inches diameter. I removed it by removing a snap ring. The welded on round swivel piece is 2.5 inches diameter not inside the actual groove, but the total outside as measured with micrometer The tube I have left measures 16.25 inches. Im sorry, but I dont have any pictures or measurements from the extension as it fell out somewhere. I want to just attach a new jack to my existing welded mount. Would this jack be a suitable replacement or is there something that would work better.
asked by: Joshua G
Helpful Expert Reply:
The Fulton # FTJ120W0301 is a perfect choice to fit right on the welded on bracket that you already have. It has a little extra weight capacity, but that's perfectly fine.
I have attached a picture with measurements of the Fulton mounting plate. Your existing one should fit this. If yours is different please send a picture and measurements I will find a better fit. I'm reasonably sure that this one will fit right in there.
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Old Dutton-Lainson 800 Pound Tongue Jack
- Shop: Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Q&A: Replacement Swivel Marine Jack for Shelby 5856A Model Jack
- Q&A: Is There a Replacement for a Shelby Jack 5856A That Uses Existing Bracket
- Video: Fulton Round Snap Ring Swivel Marine Jack Review
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Bolt On - Sidewind - 12" Lift - 1,500 lbs
- Q&A: Does Bulldog Bolt Thru Trailer Jack Weld or Bolt to Trailer Frame
- Shop: Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 11" Travel - 1,200 lbs
- Shop: Fulton Bolt-Thru Swivel Boat Trailer Jack w 2 Wheels - Bolt On - Sidewind - 12" Lift - 1.5K
- Q&A: Bolt-On Trailer Swivel jack that Mounts to a Trailer Using 1 Center Bolt
- Q&A: Replacement Trailer Jack Recommendation for Shelby # 5856A
- Shop: Square Pipe Mount Swivel Jack w Footplate - Drop Leg - Weld On - Sidewind - 28-1/2" Lift - 7K
- Video: Dutton-Lainson Sidewind Swivel Trailer Jack Review
- Video: Fulton Bolt-Thru Swivel Marine Jack Review F77CR
- Video: Dutton-Lainson Round Swivel Marine Jack Review
- Q&A: Replacement Jack Compatible with Welded Jack Plate on Ranger Boat Trailer
- Shop: Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - Black - 10" Lift - 1,200 lbs
- Shop: Dutton-Lainson Round Swivel Jack w/ 3" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs
- Search Results: st 215 75r14
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer jack
- Video: Choosing the Right Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: jack
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
on Trailer Jack
