Will the Draw-Tite Front Mount Hitch 65046 Fit a 2003 Dodge Ram 3500

Question

Question:

Will the Draw-Tite Front Hitch for the 2003 Dodge Ram Pickup #65046 fit laramie 3500?

asked by: Charles T

0

Expert Reply:

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver # 65046 that you referenced will work on your 2003 Dodge Ram 3500. I attached an installation video and instructions for this product for you to check out also.

expert reply by: Jameson C

0

Answer 1

I checked with Draw-Tite and front mount hitch #65046 does not exclude Laramie models of the 2003 Dodge Ram 3500. Curt hitch #C31017 excludes Laramie models on the 3500 series. However, for the Draw-Tite hitch one customer said that the tow hook…

view full answer...

Answer 2

I spoke with my technical contact at Curt referencing the front hitch #C31017 and he gave me the following reasons why Curt states that this hitch will not fit your 2005 Dodge 3500 Laramie. The manufacturing of the 3500 Laramie is physically slightly…

view full answer...

Answer 3

Yes, the Draw Tite front hitch part #65046 that you referenced is a confirmed fit for a 4 wheel drive 2006 Dodge Ram 2500/3500 like what you have. I attached an install video for this hitch for you to check out as well.

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver #65046 and Curt Front Mount Trailer Hitch Receiver #C31017 that fit your 2006 Dodge Ram 3500 are very similar in the mounting location. The main difference that I see is where the cross tube and…

view full answer...

Answer 5

There is a front-mounted trailer hitch receiver that fits a 2006 Dodge Ram 1500, though the correct one will simply depend on the cab that you have and the model. I will list out the fits so you can find exactly what you need for your truck. - 2006…

view full answer...

Answer 6

There's a few differences. • The Curt #C31017 is manufactured in the US, while the Draw-Tite #65046 is manufactured in Mexico. • When installed, the Curt hitch will sit higher on the vehicle for more ground clearance. The underside of the…

view full answer...

Answer 7

No. The Draw-Tite #65046 sits in just a slightly different spot than the Curt #C31017, so it will not require any trimming of the air dam.

view full answer...

Answer 8

You certainly would have enough capacity to carry a Rage PowerSport Motorcycle Carrier #AMC400 and a 275 lb motorcycle with the Curt Hitch #C31017 since the weight of those two items weigh 315 lbs and the hitch has the capacity of 350 lbs. You will…

view full answer...

Answer 9

The Draw-Tite Front Mount Trailer Hitch Receiver #65046 referenced in your question is indeed confirmed to fit your 2009 Dodge Ram 3500 4WD. This front-mounted hitch will provide you with a 2 inch receiver opening and it features a 500 pound vertical…

view full answer...

Answer 10

Draw-Tite has confirmed that their 65084 front mounted hitch receiver which we sell as part #DT36MR is NOT a fit for Diesel models of the 2019-2021 Ram 3500 truck, due to the extra plumbing used on the Diesel model. We do offer a fit for you Diesel…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Will the Draw-Tite Front Mount Hitch 65046 Fit a 2003 Dodge Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching