What is the Heaviest Capacity Winch Strap for 2" Hand Winch

Question

Question:

Whats the strongest winch strap you carry for loading a boat

asked by: Melvin L

0

Expert Reply:

It will depend on the width of the strap that your winch can handle, but something like the Fulton Heavy-Duty Winch Strap with Hook - 20' x 2" - 4,000 lbs # FWS20HD0200 has a safe working load limit of 4000-lbs and will work on hand winches that have a 2" drum.

If you've got a smaller drum and can let me know the size I can help you locate something similar.

expert reply by: Erik B

0

Answer 1

While you never want to exceed an item's working load limit (WLL) in your actual application, the nature of your trailer matters too when selecting a winch strap. If you have roller bunks rather than carpeted bunks this reduces friction and means…

view full answer...

Answer 2

We have several safety straps for trailer winches, but I have not ran into the style with a 2nd safety catch. On my boat trailer I use the winch strap to bring the boat to the appropriate spot on the trailer and then have an additional short length…

view full answer...

Answer 3

The Optronics #BUL602CRB is a 2-function lamp, taillight and back up lamp so it won't function in the fashion you're wanting. The good news is that we have a grommet mount lamp that will provide stop/turn, taillight and back up lamp…

view full answer...

Answer 4

The replacement strap is Fulton Heavy-Duty Winch Strap with Hook part #FWS20HD0200 is a 20 foot long, 2 inch wide strap that would work great to replace the T1801 that you have currently.

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

What is the Heaviest Capacity Winch Strap for 2" Hand Winch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching