Ladder Rack and Ladder Roller That Will Work With 2020 GMC Sierra 2500

Question

Question:

will a heavy duty rhino ladder roller fit on a tracrac, they both look like they have a T slot

asked by: Randy

0

Expert Reply:

We do have an option for a ladder rack and ladder roller that will work for your 2020 GMC Sierra 2500, but the Rhino-Rack won't fit the TracRac. So instead, what you would need is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack with the Yakima ladder roller. The OverHaul that fits your 2020 Sierra 2500 can be used with either 68 inch or 78 inch crossbars:

- Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - 68" Crossbars # Y01151-58 or 78" Crossbars # Y01151-59

- Ladder Roller for Yakima # Y01163

I have added links below to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Because the Yakima HD have the accessory slot in the top of the rail, and the crossbar is 3 x 1 inches, it'll be compatible with J-Style kayak carriers that either mount using the slot or clamp around the crossbar. The Yakima JayLow kayak carrier…

view full answer...

Answer 2

Yes the Yakima Overhaul HD Ladder Rack part #Y01151-58 that you referenced does come with 68 inch long crossbars.

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

I reached out to Hydrastar and they are very familiar with disc brakes on your 2018 Grand Design Momentum toy hauler. They said Grand Design typically gets their axles with 9/16" studs of which we only have the Hydrastar Disc Brake Kit w/…

view full answer...

Answer 9

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I recommend the RetraxPRO XR Hard Tonneau Cover #RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the…

view full answer...

Answer 12

Yes, it does! The PowertraxPRO XR Hard Tonneau Cover item #RTX84QR is confirmed to fit the 2024 GMC Sierra 3500 with a 6-3/4' bed. The slots built into the cover are compatible with Yakima ladder racks like the OverHaul HD Adjustable Truck Bed…

view full answer...