Shank With 5 Inch Drop Compatible With Reese Steadi-Flex RP66558
Question:
I need about a 5 inch drop, It appears that the kit shank only permits a bit more than a 2 inch drop. Is there another compatible shank that I can purchase with the required drop? Also, can you confirm that this hitch can be used on a top mounted coupler on 2x6 frame?
asked by: Christian D
Expert Reply:
There are shanks with the drop you need that are compatible with the Reese Steadi-Flex Weight Distribution System with Sway Control # RP66558.
Weight distribution shanks are interchangeable so what you can use is the Curt Weight Distribution Shank # C17121.
This shank has a maximum of 7 inches of drop with a trunnion bar system like the Steadi-Flex so it's exactly what you need. Additionally, the Steadi-Flex is compatible with your 2 x 6 frame and top-mounted coupler, so the only other thing you will need is a hitch ball, with the size of it depending on your trailer coupler. You will need either the 2-5/16" Hitch Ball # C40005 or 2" Hitch Ball # 63845.
I have added some links below to video reviews for you to check out as well if you'd like.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Weight Distribution Shank - 12" Long - 7-1/2" or 7" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 7 Inch Drop
- Round - 11 Inch Rise
- Trunnion - 10 Inch Rise
- CURT
more information >
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- Reese
more information >
Product Page this Question was Asked From
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed to Install Redarc Tow Pro Elite in 2008 Dodge Sprinter with 7-Way
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Replacement Automotive Lighting
- Q&A: Correct Replacement Strap for a Shelby Trailer Winch 5404
- Q&A: Recommended Replacement For An Atwood G6A-8E RV Water Heater
- Q&A: Diagnosing Overload Warning, No Brakes, On a Tekonsha Prodigy P3 Brake Controller
- Q&A: How To Shift A 2021 Jeep Wrangler Transfer Case Into Neutral To Flat Tow
- Q&A: Correct Replacement Oil Seal 225255UC for Ranger Boat Trailer
- Q&A: Front Mount Hitch for a 2013 Jeep Grand Cherokee for a Snowplow
- Article: Best Tire Chains
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Install E-Track in 3 Easy Steps
- Article: My Trailer Hitch Doesn't Fit