Lightweight Speakers for Mounting in the Ceiling of my Camper

Question

Question:

Hello, I have a forest river wildwood 27rkss, 2017. It came with cube speakers and one is placed so when you open the cabinets. They hit the speaker. Also I’m tall and do not like the speakers hanging from the ceiling. I would like to install recessed speakers and would need 4. Problem is, there is nothing holding the speakers in the ceiling and I’m afraid the weight of a speaker will cause the paneling to bough. I’m not huge in sound so that doesn’t concern me. What speaker would you recommend that is very lightweight and will install in the paneling that forms the ceiling? Thanks!

asked by: Sheri L

0

Expert Reply:

The Jensen Indoor RV Speaker part # 1102094 for black or part # 1102094W for white are the best option we will have. They offer a very light 4 oz. magnet versus the heavier magnets required by the higher wattage options available.

They are 24 Watt speakers so they will not deliver booming sound but do offer the lightweight aspect you're looking for.

expert reply by: Randy B

0

Answer 1

Yes, the woofer diameter of the Jensen Indoor RV Speaker part #1102094W which is-4-3/4" is larger than the cutout diameter which is 4-7/16". If you are wondering how big of a hole to drill to mount the speaker then use the cutout diameter…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to consider like the CargoSmart…

view full answer...

Answer 4

The reason the Jensen Mechless RV Stereo JWM30 is in the videos for the #JEN25RR is because they are the same stereo. JWM30 is the Jensen part number and #JEN25RR is the etrailer part number so there is no difference between them.

view full answer...

Answer 5

RV stereo manufacturers for some reason love to change the wiring harnesses between models so since you'll have to splice wires together anyway you may as well go ahead and go with another Jensen stereo since you prefer them. The closest option…

view full answer...

Answer 6

In regards to the Jensen RV Stereo part #JWM45, there are two zones each of which can support two speakers for a total of four. The zones can be cycled through using the zone buttons on the faceplate or wireless remote. It will not hurt the system to…

view full answer...

Answer 7

Yes, the Jensen RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 48W - 2 Zone - 12V #JWM45 is designed to be wired directly to your speakers. I've attached the wiring diagram from the owner's manual to help assist you in this process.…

view full answer...

Answer 8

I attached a picture to this page that has a wiring diagram for the Furrion Indoor Enclosed Amplified Subwoofer #FSW8P12CF that you referenced. I attached a review video for this for you to check out as well.

view full answer...

Answer 9

To determine the correct replacement speakers for your trailer you'll need to remove one from the wall and measure the cutout hole. From there we would just pick out speakers that match the cutout hole so that you don't need to make any…

view full answer...

Lightweight Speakers for Mounting in the Ceiling of my Camper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching