Wiring Diagram for Furrion Indoor Enclosed Amplified Subwoofer

Question

Question:

I need a good print for wiring furrion. Part#. Fsw8p12cf Thank you

asked by: Mark G

1

Helpful Expert Reply:

I attached a picture to this page that has a wiring diagram for the Furrion Indoor Enclosed Amplified Subwoofer # FSW8P12CF that you referenced.

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

In order to hook up a subwoofer to the iRV RV Stereo part #iRV34, you'll need to use an active speaker which is one that has a built-in amplifier. For this, the Furrion Indoor Enclosed Amplified Subwoofer part #FSW8P12CF is our best option…

view full answer...

Answer 2

You can use pretty much any speakers with the Jensen #JHD910BT. I recommend using the Jensen Coaxial Indoor RV Speaker - Recessed Mount - 6" Diameter - 50 Watts - Black- Qty 1 #1103030 as the basic speakers, which are a recessed mounting…

view full answer...

Answer 3

The Jensen Enclosed Amplified Marine Subwoofer #JMPSW800 is designed to have RCA cables which are just signal wires ran to it and not speaker wire that carries an amplified signal, but what you can do is get a speaker wire to RCA adapter and…

view full answer...

Answer 4

I recommend taking a look at the Taskmaster ST205/75R14 Radial Trailer Tire #TR20514. This is a great radial tire with a maximum load of 1,760 pounds at 50 psi. It has an excellent maximum speed of 81 mph and a 6 ply rating and also includes a 2-year…

view full answer...

Answer 5

The rear panel of your Drive RV stereo will have number of connectors. These will include INPUTS for 12V operating power, a radio antenna and for connecting outside audio sources such as the stereo sound output from your TV which allows you to run…

view full answer...

Answer 6

The Jensen Stereo #JWM60A most likely needs to be reset. The connections you mentioned are most likely causing issue if I understand correctly because you will only be able to use one input signal at any given time. If you are using the USB input,…

view full answer...

Answer 7

We have a couple of subwoofers available that are going to improve the sound, and we have options for both indoor and outdoor. - Outdoor: Jensen Enclosed Amplified Marine Subwoofer - Surface Mount #JMPSW800 - Indoor: Furrion Indoor Enclosed Amplified…

view full answer...

Answer 8

There are two different methods of installing the Greystone 32" Electric Fireplace #324-000076. You can use the included hinges for installation but as you mentioned this is going to cause the fireplace to stick out versus having a recessed…

view full answer...

Answer 9

The Greystone 32" Electric Fireplace with Crystals #324-000076 that you referenced requires cut out dimensions of 29" wide x 4-3/8" deep x 14-1/3" tall but since the top flange is quite a bit taller at 16-3/4 inches your cut out…

view full answer...

Answer 10

The Go Power Automatic Transfer Switch #34264403 that you referenced is a good way to automatically switch between shore power (when available) and an inverter that's being powered by solar charged batteries. It is always going to use shore power…

view full answer...

Answer 11

Your iRV stereo should have an RCA cable input/output on the rear, based on the information that I was able to find about that stereo. What you would do then is just use an RCA cable to go from your iRV stereo directly to the RCA input on the Furrion…

view full answer...

Answer 12

The Furrion Indoor RV Soundbar - Surface Mount - 29-3/4" Wide x 3-7/8" Tall - 40 Watts - Black #FSB24SA2C-BL does have mounts for a wall that are sturdy enough for the TV mount you are referencing. I attached a photo to assist as well as a…

view full answer...

Wiring Diagram for Furrion Indoor Enclosed Amplified Subwoofer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching