Replacement Brakes for 2013 Heartland Gateway 3200RS with Tandem Axles
Question:
I have a 2013 Heartland Gateway 3200RS fifth wheel camper and need to replace all 4 electric brake assemblies. Can you tell me what part numbers I will need to buy? I believe they are 12”, but not 100 sure.
asked by: Dennis R
Expert Reply:
From what I was able to find, the 2013 Heartland Gateway 3200RS has a GVWR of 14000-lbs, so it would be most likely that the trailer has 5200-lbs or 7000-lbs axles; this size axle would have hubs that accept 12" brakes, so you're likely correct. If you can confirm that your axles have that capacity then they will take 12" brake assemblies.
To replace those old brakes I recommend using the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA, which are a self adjusting brake set that will provide you with fully bonded brake pads that will last longer than riveted brake pads. These brake assemblies don't come with mounting hardware so you'll need to add that with # BRKH12, and you'll need two sets of the hardware and brakes for a tandem axle trailer.
I've linked a review and installation video of these brakes for you to have a look at. If you have something other than 5200 or 7000-lbs axles then just let me know and I can get you the correct brake assemblies.
Products Referenced in This Question
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Grease Seals 10-36 (pair)
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Q&A: Hub & Drum And Dexter Electric Brakes For 2014 Heartland Gateway 3200RS 5th Wheel Trailer
- Q&A: Differences Between Air Springs and Jounce Style Springs
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-342-343 Review
- Shop: Suspension Enhancement
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Trailer Wiring
- Search Results: l44649
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Shop: Gooseneck Hitch
- Search Results: l68149
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Search Results: leaf spring