How to Identify Capacity of Axles on 2009 Keystone Sydney 31KFW

Question

Question:

I need to find out axle capacity brake size and hub size it is a 2009 keystone sydney 31kfw it has a dexter axle po 724570-50 another #120691-2 another #58213 D52 Thanks

asked by: Ed K

0

Expert Reply:

The quickest and easiest way to identify your axle capacity is by the wheel bearings.

If you can get me the reference numbers from your inner and outer bearings, I should be able to easily determine your axle capacity. The bearing numbers are stamped into the bearing cage as shown in the photo I have edited for you. Once the capacity is known, I can recommend replacement hubs and brake assemblies.

expert reply by: Mike L

0

click to enlarge

Answer 1

It sounds like you are looking for the correct braking assemblies and hubs/drums from a Dexter D52 Axle. If that is the case then we have just what you need, the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-458-459 and the Dexter Trailer…

view full answer...

Answer 2

The manufacturer of the TruRyde bearing and seals we carry like what come in the kit #BK2-100 is TRP International.

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

How to Identify Capacity of Axles on 2009 Keystone Sydney 31KFW

Product Page this Question was Asked From

Continue Researching