Could VueSMART RV Backup Camera HM34FR be Used as Backup Camera

Question

Question:

The hopkins back up camera P/N HP34FR. Can this camera be mounted to a vehicles rear bumper on the bottom and used as a back up camera system.

asked by: Danny

1

Helpful Expert Reply:

Yes if you wanted to mount the VueSMART RV and Trailer Backup Camera - Wireless # HM34FR to the rear bumper you could.

expert reply by: Jameson C

1

Answer 1

Curt has a recommended setup procedure outlined for the Curt Echo part #C51180 that is outlined in their install instructions for this controller but since not all trailer brakes apply the same way there isn't a standard setting you can use that…

view full answer...

Answer 2

Yes, for the VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View #HM34FR to receive power the light it's tied into will need to have power running to it. So if you tie it into running lights the tow vehicle would…

view full answer...

Answer 3

The difference between sensitivity and max output for the Curt Echo brake controller part #C51180 is that max output is the max braking power the controller would put out if it felt like it needed to apply them as hard as possible. So this needs to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 6

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp on…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 9

Yes, there are SumoSprings that fit your 2021 Ford E-450 cutaway chassis, and what you need is the following: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-130-54

view full answer...

Answer 10

Jounce springs will sit on the frame and come into contact with the axle as the suspension compresses. Typically the vehicle manufacturer will place a rubber-type material here to prevent the harsh bump between these two components when heavily…

view full answer...

Answer 11

Between the two part numbers #SSR-130-54 and #SSR-130-47 the key difference is the amount of support each will provide for your 2021 Ford E-450 Class C motorhome. The 47 provides 1,500 lbs of additional support whereas the 54 provides 2,800 lbs. To…

view full answer...

Could VueSMART RV Backup Camera HM34FR be Used as Backup Camera

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching