Do the Malone Trailers Come with a VIN That Allows Them to Be Registered and Licensed  

Malone's V-Style Kayak Carrier (now discontinued) were intended specifically for their XtraLight series Trailers (which are also discontinued) but they do offer a kayak carrier that is designed for use on your MicroSport trailer, their…

The VIN sticker that comes with the Malone trailers like the Microsport part #MPG460G is supposed to be applied up near the coupler of the trailer on the frame. It comes as a separate decal though so it's up to you where to put it.

The VIN sticker for the Malone MPG585XB EcoLight trailer which we offer as #MAL73FR should have been included along with the registration paperwork. The VIN sticker is placed on the same sheet that has the tire load information sticker that looks…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR.…

The Malone SeaWing Kayak Carrier and Load Assist w/ Tie-Downs #MPG113MD does fit the factory crossbars of your 2019 Toyota Highlander and as long as you load the kayak/canoe to either side of the shark fin antenna you'll be fine. The Toyota…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The Air Lift kit part #AL60786 is for the SR-5 models of the 2011 Toyota Sequoia and the part #AL60826 is for the other models aside from the Platinum version. Since you do not have a SR-5 or Platinum the correct kit is the #AL60826.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Derrick, the good news is yes it does exist. So what you're going to want is the Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing #AKFBBRK-35 for brakes, and the 10" Hub and Drum for 3.5K Axle #AKBD2-545-97 for the hub and drum.…