How To Replace a 4-Way Trailer Connector Without Standard Wire Colors
Question:
My housing broke off my 4 pin trailer. Need to buy a new housing and reconnect wires. Question: my 4 wires coming from the trailer are 1 green, 1 brown, 1 yellow, 1 yellow/brown. Not sure what the yellow/brown wire connects two since this wire is 2 colors.
asked by: Ryan H
Expert Reply:
In order to replace a 4-way trailer connector you can use part # HM48192 for the trailer end or part # HM48190 for the vehicle end. These connectors both have built-in lights to help with troubleshooting. In regards to installation; the usual wire colors are green for right stop/turn, yellow for left stop/turn, brown for running, and white for ground. If you have different colors which is the case you will unfortunately have to test each wire for function by touching the wire lead directly to a battery to see which circuit it illuminates.
Products Referenced in This Question
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 4 Flat
- Hopkins
more information >
Continue Researching
- Q&A: Recommended 4-Way Connector for 6-Wire Trailer Wiring
- Shop: Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Trailer End
- Shop: Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 9 Diodes - Red Lens
- Shop: Optronics LED Trailer License Plate Light with Bracket - Submersible - 5 Diodes - Clear Lens
- Q&A: How to Run Wishbone 4-Way Wiring to the Hopkins Endurance Quick-Fix Replacement 4-Way
- Shop: 20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Shop: Wesbar Wishbone Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 18" Long
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 11 Diodes - Red Lens
- Shop: Trailer Wiring
- Video: Hopkins Wiring - Trailer Connectors - HM48110 Review
- Video: Bargman Wiring - Trailer Connectors - WG54006-043 Review
- Video: Hopkins Endurance Trailer Wiring Harness Installation
- Video: Wesbar Wiring - Trailer Connectors - 54000-026 Review
- Video: Wesbar Wishbone 4-Pole Flat Trailer Connector Wiring Harness Review
- Video: Optronics Trailer Lights - Tail Lights - STL59RB Review
- Video: Bargman 7-Way RV-Style Connector with Coiled Cable Review
- Q&A: Recommended Trailer Wiring Replacement For Sea Doo Trailer
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Plug is a 4-Way Flat But there are 6 Wires
- Q&A: Can the Thinline LED Trailer Tail Light Be Mounted On a Curved Surface
- Q&A: 4 Round to 4 Flat Boat Trailer Wiring Adapter
- Search Results: 4 pin to 7 pin adapter
- Search Results: 7 way plug
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Search Results: submersible led trailer light kit
- Search Results: led trailer light kit