Fairing Recommendation for Thule WingBar Evo Roof Rack on 2015 Honda Accord

Question

Question:

I have the Thule Wingbar Evo 53 inch for my Honda Accord. I need a wind fairing but it appears the Thule fairing doesnt fit Evo bars? Is there a fairing that works with these bars? Thanks

asked by: Bart

0

Expert Reply:

The Thule fairings don't fit the WingBar Evo crossbars, as the crossbar dimensions are a little different than the older AeroBlade crossbars but the Yakima fairings which use a strap-type clamp will fit. For the 2015 Accord, Yakima recommend the # Y05018 46 Inch WindShield fairing.

expert reply by: Mike L

0

Answer 1

The Thule Aero bars like the #TH711400 really don't need a fairing as they were designed to be as aerodynamic as possible. The only real reason you'd want to also use a fairing is if you liked they way they looked.

view full answer...

Answer 2

I have a solution for you. Unfortunately, both the Thule XADAPT2 #Xadapt2 and the Replacement L-Clamp for Thule Big Mouth Roof Mounted Bike Carrier #853-5551 will not enable you to use your older Thule Big Mouth bike rack on your aero-style factory…

view full answer...

Answer 3

The top channel dimensions of the Aeroblade and Wingbar crossbars are the same so the Thule #XADAPT2 would work with the new rack you have. The wingbars have rubber seals built into the top channels to reduce wind noise but they will still work…

view full answer...

Answer 4

Yakima Mighty Mount 39H #Y03539 are designed specifically for Yakima Core and JetStream crossbars. For the Thule AeroBlade crossbars the best option is the universal MightyMounts #Y03590.

view full answer...

Answer 5

While we have a fairing solution that fits the Thule Wingbars the Thule fairings do not fit since the bar dimensions are slightly different. Instead you'd want one of these fairings as they fit most styles of crossbars. So for a 40 inch fairing…

view full answer...

Answer 6

The gas struts for the Thule Hullavator 897XT are not available for replacement, unfortunately. So in order to replace the gas struts on your Hullavator, you're going to need to replace the entire assembly with the Replacement Arm Assembly for…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

The Konig Tire Chains #TH01221102 (CB-12 102) and Konig Tire Chains #TH00023102 (CG-9 102) are virtually the same except that the #TH01221102 has assisted tensioning and the #TH00023102 is self tensioning. With the assisted tensioning you would have…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Fairing Recommendation for Thule WingBar Evo Roof Rack on 2015 Honda Accord

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching