Recommended Stake Pocket Tie Downs For 1992 Ford F-150

Question

Question:

Will this fit a 1992 F-150 stake hole?

asked by: Tyler

0

Expert Reply:

I have another option but the ProGrip Retractable Tie-Down Anchors for Truck Bed Stake Pockets # 917-850760 you referenced are not confirmed to fit the stake pockets of your 1992 Ford F-150.

I recommend the Erickson Stake Pocket Tie-Down Anchors # EM09085 as a customer was able to install them on his 1992 Ford F-150 with minor trimming to the anchor base plate. I included the picture of the Erickson # EM09085 installed on the customers 1992 F-150 for you to take a look at.

expert reply by: Samuel C

0

click to enlarge

Answer 1

There are stabilizer jack handles with a 3/4" socket that have some length to them, but not quite the 16 inches you are looking for; the closest would be the Replacement Handle for Scissor Jacks #BAL-24033. This handle measures 27-1/2" long…

view full answer...

Answer 2

It sounds like you are trying to decide between the B&W Tow & Stow 3-Ball Mount part #BWTS20049B which has 7" of drop and the B&W Tow & Stow 3-Ball Mount part #BWTS20048B which has 4-1/2" of drop. If that is the case then…

view full answer...

Answer 3

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 4

We do carry some nice heavy duty rubber plugs to protect the factory prep package on a Chevrolet Silverado. For this, you can use the Rubber Hole Cover part #RP30136 for the gooseneck hole and the Puck Plug Covers part #58199 for the pucks.

view full answer...

Answer 5

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

view full answer...

Answer 6

Installation of the DeeZee Tailgate-Lowering System #DZ43203 is simple enough and this unit can indeed be easily removed and stored during your 5th wheel towing season or if you want to load a truck camper. Please refer to the linked video for…

view full answer...

Answer 7

The Deezee Tailgate Assist part #DZ43203 is a confirmed fit for your 2016 Ford F-350. We can't recommend the use of two of these units on your truck but with just the one you should feel a significant difference and I would highly doubt you would…

view full answer...

Answer 8

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

view full answer...

Answer 9

Since the Brophy stake pocket mount tie downs, #TDSF, bolt into place, you would just need to un-bolt them from the truck to remove them for the season. It would be a good idea to then apply some sort of rust prevention where the hardware for the…

view full answer...

Answer 10

You just need 1 locking hitch pin, like the Stainless Steel #e98882, to secure the B&W Tow & Stow 2-Ball Mount #BWTS10033BB to your truck. B&W designed their ball mounts so the platform section cannot be removed while the assembly is…

view full answer...

Recommended Stake Pocket Tie Downs For 1992 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching