How Does Custer Reflective Slow Moving Vehicle Sign to Tractor

Question

Question:

Its not clear from the picture how the mounting bracket attaches to the tractor. Can someone explain how this works?

asked by: Kirk C

0

Expert Reply:

So the Custer Reflective Slow Moving Sign # EMB20GM attaches to the Custer Slow Moving Vehicle Mount Kit Spade
Item # EMB-HDW-SPD which then slides into the # EMB-HDW-SKT that you referenced. And the bracket attaches to the tractor with the included carriage bolts.

expert reply by: Jameson C

0

Answer 1

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

view full answer...

Answer 2

I do have an option for you but we don't carry any extenders/repeaters compatible with with the Chevy factory trailer TPMS. The best option we have would be a standalone system, the iN-Command TPMS part #NCTP100 which uses a mobile device for a…

view full answer...

Answer 3

All of the TPMS sensors we carry are closed systems so they wouldn't be compatible with the GM sensors you have, you would need to get these from GM directly. I also can't speak to the fitment of GM's sensors with the stems on a 5th wheel…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 7

Hey Brad, thanks for reaching out! What pin box number do you currently have installed on your 2021 Grand Design Reflection 31MB? You should find a sticker with a number like "1621" or even a serial number and the brand would work. Not all…

view full answer...

Answer 8

So the number GH-8045AL you are seeing is the Gen-Y part number for our #GY58GR. So everything is okay with that. As far as the height and the mounting holes it can vary so much from camper and vehicle that I always say it is best to just ensure you…

view full answer...

Answer 9

Hey Bruce, while the Gen-Y fifth wheel to gooseneck adapter part #GY58GR doesn't provide additional turning clearance the tapered nose of your 2022 Grand Design Solitude 280RK with the "longer" short bed both of your trucks have would…

view full answer...

Answer 10

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 11

Since you're talking about an offset ball and don't want a slider it sounds like you have the 2024 Sierra 3500 short bed. Even with the offset you aren't going to be able to make a full 90 degree turn. I'm also not sure what your…

view full answer...

Answer 12

Based on the information I can find I see the 2023 Grand Design Solitude 382WD comes with a MORryde Pin Box #MR83QR which has the Lippert Rhino bolt pattern. That would require the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY98GR. You can verify…

view full answer...

How Does Custer Reflective Slow Moving Vehicle Sign to Tractor

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching