Height and Weight of Pace Edwards EL200 Ladder Rack for Ram Trucks

Question

Question:

I am looking at purchasing the pace edwards Item # 311-ELD0101 ladder rack. I looked at both your site and the manufacturers. I cannot find specs of the height of the system, or the complete weight of the system. Do you have that information? Thanks

asked by: Jeff D

0

Expert Reply:

I was able to find out the information you were looking for regarding the EL200 Ladder Rack for Pace Edwards UltraGroove Tonneau Covers - Dodge # 311-ELD0101.

The height of the rack is 24-1/2 inches, and the weight is 30 lbs.

expert reply by: Kyle S

0

Answer 1

I do have a couple options for ladder racks to fit with the UltraGroove Retractable Hard Tonneau Cover part #311-KRD7833 for the 2017 Ram 2500 6-1/2 ft bed without rambox but the Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43003XT-000…

view full answer...

Answer 2

The Inno Square Crossbars - Steel - Black - 79" Long - Qty 2 #IN436L can mount to your Pace Edwards Ultragroove using the Inno Feet for Square Crossbars #INXP.

view full answer...

Answer 3

The Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover - Aluminum - Matte Black Item #Item #311-KMD7833 and the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover w Explorer Series Rails - Aluminum Item #311-FED7833 for the…

view full answer...

Answer 4

What I understand is that you have the 2021 Ram 1500 with 5-1/2' bed and the Pace Edwards UltraGroove Retractable Hard Tonneau Cover, #311-KRDA24A55, or similar model, installed. This design of retractable tonneau cover with the T-slot rails lets…

view full answer...

Answer 5

I have a great solution to a ladder rack for you. I confirmed with my contact at Pace Edwards that the supports that hold up the bars are black and the crossbars are silver on the EL200 Ladder Rack for Pace Edwards UltraGroove Tonneau Covers…

view full answer...

Answer 6

I have a suspicion about what might be causing the problem you mention. Do your trucks have 6-way trailer connectors? Or, do the trucks have 7-way connectors, but you are using a 6-way to 7-way adapters because the trailers use 6-way connectors?…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 11

Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with a…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Height and Weight of Pace Edwards EL200 Ladder Rack for Ram Trucks

Product Page this Question was Asked From

Continue Researching