Load Bar for Top of Rhino Rack Pioneer Platform Tray # RR33QX

Question

Question:

Which rhino rack accessory bar will best fit the 52 long x 56 wide platform JA8547? The 48 bar, when mounted is not centered on the platform.

asked by: Lemar B

0

Expert Reply:

With the Rhino Rack Pioneer Platform part # RR33QX that you referenced the recommended accessory bar is the part # RR43138B which is 53 inches long.

expert reply by: Jameson C

0

Answer 1

Rhino Rack offers a crossbar adapters for the top of their Pioneer Platform trays with the part #RR43138B for a 53 inch bar, part #RR43119B for a 48 inch long bar, and #RR43232B for a 24 inch long bar which attaches to the top of the platform and…

view full answer...

Answer 2

I reached out to my contact at Rhino-Rack and because of the way that the traditional roof boxes mount like the Yakima SkyBox NX 16 Rooftop Cargo Box #Y95AV the hardware won't be able to fit to the crossbars on the underside of the platform.…

view full answer...

Answer 3

Yes. The Rhino Rack Accessory Bars for Pioneer Platform Rack #RR43138B will fit on the 84" x 56" Pioneer Platform #RR75TB.

view full answer...

Answer 4

I do have a good option for you, however your existing Yakima SkyBox NX 16 #Y95AV won't be able to mount to the 48" Accessory Bars #RR43137B on the Rhino-Rack Pioneer Platform. This is because the mounting clamps on the Yakima Box, which are…

view full answer...

Answer 5

The Yakima Skybox NX 16 #Y95AV is exactly what I recommend for you. This is due to it having a large storage size of 16 cubic feet and the fact that the SkyBox will mount forward on your vehicle giving you an additional 4-1/4" of rear hatch…

view full answer...

Answer 6

The Rhino-Rack MasterFit Rooftop Cargo Box part #RRRMFT440 fits any crossbars measuring up to 3-9/16" wide x 1-3/8" tall with a spread between 24-3/8" - 36-5/8" (center to center). In regards to roof clearance, I can't imagine…

view full answer...

Answer 7

I have some great options for you as far as pioneer platforms on your LeerXR camper shell. In order to mount the 60x56 Pioneer Platform #RR72TB with factory Thule tracks, you will need the Rhino-Rack Universal Modular Backbone Mounting System - Short…

view full answer...

Answer 8

The Thule Motion XT Rooftop Cargo Box like part #TH629707 will work out great with the Rhino-Rack Accessory Bars for Pioneer Platform Rack part #RR43138B on your Rhino-Rack Pioneer Platform Roof Tray part #RR75TB. I do understand the concern but the…

view full answer...

Answer 9

Yes, the Rhino-Rack Pioneer Platform #RR42115BF is designed specifically to clamp around factory-style crossbars like what you have on the Tacoma. This will work perfectly. I have attached a short video demonstration below that you can also check…

view full answer...

Answer 10

I have a great ski/snowboard solution for you. Unfortunately, since the Yakima FreshTrack 4 Ski and Snowboard Carrier - Locking #Y03092 only use a clamp-on mounting method, it will not be able to fit on a Rhino-Rack Pioneer Platform like the #RR77AB.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Load Bar for Top of Rhino Rack Pioneer Platform Tray # RR33QX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching