Which Trailer Idler Hub Assembly For 5 on 4.5 15 Inch Wheels
Question:
I am wanting to purchase your SE Smith Trailer Hub CE13315. It states a limit of 14 wheel for a 2700# axle. I am wanting to utilize 5 on 4.5 15 wheels on a project I am working on. Please advise. Thank you.
asked by: Ryan R
Expert Reply:
It sounds like you actually need the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 # AKIHUB-545-2-LF-2K which will allow you to use your 5 on 4.5 15 inch wheels.
The CE Smith Trailer Idler Hub # CE13315 you mentioned is only able to be used with wheels up to 14 inches due to the size of the surface that contacts the wheel.
To make sure the Trailer Idler Hub Assembly # AKIHUB-545-2-LF-2K will work on your spindle you will need to either find the bearing number on your current spindles, or to use digital calipers like # PTW80157 to measure for the inner and outer bearing diameter.
I included a picture that shows you how to measure your spindle to check for bearing diameter.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: dexter 8 259
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Shop: Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Video: Rhino-Rack Sunseeker Awning Review
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Q&A: Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer Bearings
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Q&A: How Much Grease Should be Added to the Bearing Buddy Bearings
- Shop: Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 7' Long x 6' 10" Wide
- Search Results: ce13315
- Search Results: hub kit
- Search Results: 12192tb
- Search Results: ce13311
- Search Results: cotter pin
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: Does etrailer Trailer Hub Assembly # AKIHUB-545-2-2K Come Pre-Assembled and Greased
- Q&A: Recommended Hub Assembly for L44649 Inner/Outer Bearings and Grease Seal with 1.25 Inner Diameter
- Search Results: hub flange
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K