Thule Traverse Fit Kit that Fits 2019 Mitsubishi Outlander

Question

Question:

We have a 2019 Mitsubishi Outlander. No roof rails, it has fixed points. We also have a set of Thule 480R Rapid Traverse feet with Aero bars, from our last vehicle. My question is: Will the FitKit 3128 work with our THule 480R Rapid Traverse feet? Thank you.

asked by: Christian E

0

Expert Reply:

Yes the fit kit part # THKIT3128 does fit your 2019 Mitsubishi Outlander and the Thule Rapid Traverse feet you have which are actually now discontinued.

expert reply by: Jameson C

0

Answer 1

I can definitely help you out! I went ahead and confirmed with the instructional manual of the Thule Fit Kit - 3128 #THKIT3128 that these mount directly into the fixed mounting points on your 2022 Mitsubishi Outlander (Sport models only). There are…

view full answer...

Answer 2

I have a few recommendations but all of the roof rack systems for your 2020 Mitsubishi Outlander will run across the roof from driver side to passenger side and not front to back. If your Outlander has flush mounted rails that run front to back I…

view full answer...

Answer 3

I believe you are referring to the top rubber cover of your Thule AeroBlade crossbars and for that we the Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars - 59" Long #TH69JH. These fit the 7501, 7501B, 7502, 7502B, 7503,…

view full answer...

Answer 4

For your 2015 Mitsubishi Outlander without any side rails I recommend the Thule Roof Rack that includes: -Thule AeroBlade Edge Roof Rack - Fixed Mounting Points/Flush, Factory Side Rails - Aluminum - Black #TH7602B-TH7603B -Fit Kit for Thule…

view full answer...

Answer 5

The fit kit you need to attach your 460 Thule Podium feet to the flush mounted rails of your 2018 Mitsubishi Outlander is the 4030, but it has unfortunately been discontinued so the only two options you have are to get some secondhand or buy a new…

view full answer...

Answer 6

Sounds like you are looking for roof rails for your 2017 Mitsubishi Outlander SE that run front to back and not a rack that includes crossbars that run from side to side. Since there's not much you can do with just the front to back rails the…

view full answer...

Answer 7

To install the Thule Aeroblade Edge Roof Rack part #TH7602-TH7603 to any vehicle, including your 2018 Mitsubishi Outlander, a fit kit is required. I apologize for any confusion on that but you'd need the fit part #THKIT3128 that you referenced as…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 11

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...

Thule Traverse Fit Kit that Fits 2019 Mitsubishi Outlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching