Air Bag Suspension Kit that Fits 2020 Ram 3500 Cab and Chassis

Question

Question:

Will the Airlift 7500XL work with chassis cab models or just the normal pickup models? Ive got a Ram 3500 Tradesman Dually in the chassis cab configuration.

asked by: Richard

0

Expert Reply:

I have an air bag suspension kit that fits your 2020 Ram 3500 cab and chassis Tradesman with the part # F2478 but the Air Lift kit you mentioned does not fit the cab and chassis model trucks.

For a compressor kit then the heavy duty part # F2097 will work great to make inflating the bags and maintaining them easier. The compressor will inflate faster than standard compressors and the gauge inside the vehicle will allow you to monitor and inflate them from inside the vehicle.

expert reply by: Jameson C

0

Answer 1

I checked with Firestone and they do list the Firestone Ride-Rite Air Helper Springs part #F2478 as a fit for a 2018 Ram 3500 Cab and Chassis.

view full answer...

Answer 2

There is an Airbag system for your 2022 Ram 3500 Dually Cab and Chassis but the Air Lift LoadLifter 7500 XL Air Helper Springs item #AL57595 will not fit your truck. You are going to want the Firestone Ride-Rite Air Helper Springs item #F2478. These…

view full answer...

Answer 3

The correct air bags for a 2022 Ford F-350 Cab and Chassis are the Firestone Ride-Rite Air Helper Springs part #F2176. These will do a great job of helping to provide additional support, improving stability, and smoothing out the ride. They have a…

view full answer...

Answer 4

I may have a solution for you to add airbags to your 2021 Ram 3500 Cab and Chassis, but AirLift does not make an air bag solution for this truck. You'll want to measure the distance from the outside of the frame to the inside of the tire and make…

view full answer...

Answer 5

I have an air bag solution for you. Unfortunately, if you have a 2022 Ram 3500 CA60 chassis cab, the Air Lift LoadLifter 7500 XL #AL57531 will not fit. This is because these air bags are only designed for standard pickup models. However, we do have…

view full answer...

Answer 6

The Firestone Ride-Rite Air Helper Springs part #F2478 are a confirmed fit for a 2020 Ram 3500 Cab and Chassis. I took a look in the installation instructions and there was no mention of modifying the axle vent. I have attached a photo of how the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...