Replacement Wiring and Junction Boxes for Gooseneck Trailer

Question

Question:

it looks like the wires are run inside a square tube. it has one junction box on the left side mid way looks like it for the brakes. it also has clearance lights on front both sides and back. there is also a junction right by the gooseneck hook up part.

asked by: Doyle

0

Expert Reply:

We have jacketed 7-way wire like with part # DW04914-1 which we offer by the foot and also we have junction boxes like # PK52248 which you could use in all of the junction box locations you mentioned.

expert reply by: Jameson C

0

Answer 1

If you click on the link I've provided, you can see our Trailer Wiring FAQ article, which will show you exactly how the connector on your gooseneck trailer should be wired. I took the liberty of looking in on your order, and saw that you're…

view full answer...

Answer 2

If you had a larger battery than what comes with a breakaway kit like the #20020 it could be used to power interior lights as well as perform the breakaway function, but legally this would be something you'd have to check with your local DOT on.…

view full answer...

Answer 3

You can certainly add a 7-way trailer connector to your trailer with 6 wires. You would simply have 1 pin on the 7-way connector that did not function. I recommend adding a 7-way molded trailer wire connector like part #H20046, and a junction box…

view full answer...

Answer 4

We carry exactly what you are looking for, the BoatBuckle Pro Series Kwik-Lok Bow Tie-Down Strap #IMF18741. The hook end of this strap attaches to your boat's bow while the loop on the other end goes around your boat trailer's frame. This is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Replacement Wiring and Junction Boxes for Gooseneck Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching