Where to Find Brake Controller Install wiring on 2019 Ford Ranger

Question

Question:

I can not find the factory wires on the 2019 Ford Ranger

asked by: Tom H

0

Expert Reply:

If you fast forward to the 15 minute mark of the install video I attached to this page you can see where we found the brake controller install wiring on a similar 2019 Ford Ranger as yours. It's hard to describe so watching the video would be the easiest solution.

expert reply by: Jameson C

0

Answer 1

The Redarc Tow-Pro Liberty, part #RED24FR is compatible, and would be an excellent choice for your 2019 Ford Ranger. As you mentioned, the Ranger has blunt-ended wires for the tow package connection under the dash to the left of the steering column,…

view full answer...

Answer 2

I have a similar brake controller solution that does work with the emergency braking system of your 2019 Ford Ranger with the P2 part #90885 and the diode kit part #7865 but Redarc doesn't have a diode kit yet to allow the Tow Pro Elite part…

view full answer...

Answer 3

All you'd need to wire in the Redarc Tow Pro Elite part #RED44FR to your 2020 Ford Ranger with a factory 7-way is the brake controller as there isn't a connector/port under your dash for one to plug in but there is wiring present that…

view full answer...

Answer 4

Yes, we have brake controllers that will work with your 2011 Cadillac Escalade. The Redarc Tow-Pro Liberty Brake Controller #RED24FR is a great choice for your Escalade. The knob controller is much nicer than having a large bulky controller on your…

view full answer...

Answer 5

We have the parts you're looking for! It looks like Ford is using the Redarc Tow-Pro Elite, part #RED44FR, as the brake controller for a 2020 Ford Ranger. If your Ranger has a factory 7-way, then the harness you need to install this brake…

view full answer...

Answer 6

You can absolutely install the Redarc Tow-Pro Liberty #RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness #C56431 installed, you will just need the universal wiring harness #RED69FR. While Ford did not run a trailer brake…

view full answer...

Answer 7

The Redarc #RED24FR Tow-Pro Liberty will indeed work just fine with your 2022 Ford Ranger, because brake controllers aren't a vehicle specific piece of equipment. In addition to the controller itself, you'll also need the wiring pigtail, part…

view full answer...

Answer 8

The Kit in the Ford Accessories Store will be exclusive to Ford. None of the other components you mentioned are available elsewhere. You can still install the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR on your 2021 Ford Ranger. Their kit…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Where to Find Brake Controller Install wiring on 2019 Ford Ranger

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching