Are Mounting Brackets Included With Camco RV Refrigerator Vent Cover

Question

Question:

You speak of mounting brackets, does it come with the product, I only see screws

asked by: Jacki C

0

Expert Reply:

The installation hardware - including the mounting brackets - is included with the Camco RV Refrigerator Vent Cover - White # CAM42160 or Black # CAM42163.

I have added a photo showing the mounting brackets along with the screws that you mentioned for the cover.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Camco RV Refrigerator Vent Cover #CAM42160 is designed for Norcold refrigerator bases but I went out to our warehouse to take some measurements on the mounting holes for the cover so you can compare it the specific N841.3 model you have. There…

view full answer...

Answer 2

We do have replacement vent covers for the fridge roof vent that are designed for Dometic, Camco, and newer Norcold bases. The cover comes in White #CAM42160 or Black #CAM42163 depending on what color you want. There are 2 different sets of…

view full answer...

Answer 3

We do have a few refrigerator vent covers currently available. In order to choose the correct cover, you will want to take a few measurements on your existing vent cover. If you can locate the manufacturer and model on your current unit, this will…

view full answer...

Answer 4

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008,…

view full answer...

Answer 5

Thanks for the picture of the roof vent you have. Based on that the replacement screen you need is the part #BVC0573-31 that you referenced.

view full answer...

Answer 6

Only one photo came through, but Dometic bought out that portion of Atwood. We have the Replacement Lid for Dometic Refrigerator Vents - Polar White #VM65528 which may fit your Atwood fridge. The overall dimensions are 27 inches by 10-3/4 inches…

view full answer...

Answer 7

The Camco RV Refrigerator Vent Cover - Top Only #CAM42160 has a second set of mounting holes at 4-1/8" x 23-1/2". I recommend double checking the measurement you have to see if this cover will fit. If not you can replace the vent…

view full answer...

Answer 8

As long as your existing vent is part #V2092, V2110, V2094 or V2119, the replacement screen you mentioned would work great for you. As you can see in the photo I edited for you, the screen frame does feature a knockout that can be removed so that…

view full answer...

Answer 9

Camco Refrigerator vent cover #CAM42160 does fit Dometic bases but you can also go by the dimensions if you aren't sure. This cover is meant to fit a base that measures 26 inches long by 7-1/2 inches wide. The cover itself is 33-1/4 inches…

view full answer...

Answer 10

It sounds like you are looking for the Camco RV Refrigerator Vent Cover in Black #CAM42163 or White #CAM42160. This cover fits over a Dometic or Norcold refrigerator roof vent. We do have the Base in White #CAM42161 or Black #CAM42164 as well if that…

view full answer...

Answer 11

For your Dometic RM2652 fridge we do not have a cover that fits the 21-1/2" x 4-1/4" screw holes you are looking for. The RV Refrigerator Roof Vent Cap and Base #DMC37FR (#DMC97FR for black) has screw hole measurements of 22" x…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Are Mounting Brackets Included With Camco RV Refrigerator Vent Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching