Replacement Refrigerator Roof Vent Cover for a Dometic RM2611

Question

Question:

Need a 1996 model RM 2611 dometic refidgetor roof vent cover. Dont know which one to get . Newer model or older model, or if the universal model will fit. Thanks.

asked by: Garold

0

Expert Reply:

Camco Refrigerator vent cover # CAM42160 does fit Dometic bases but you can also go by the dimensions if you aren't sure. This cover is meant to fit a base that measures 26 inches long by 7-1/2 inches wide. The cover itself is 33-1/4 inches long, 10-1/4 inches wide, and 3-5/8 inches tall.

expert reply by: Michael H

0

Answer 1

If your vent cover measures 23-3/4" x 6-3/4" then I recommend the RV Refrigerator Roof Vent Cap and Base Black #DMC97FR ( #DMC37FR for white) which is used for multiple Dometic RV refrigerators. If you have a larger vent cover at 26"…

view full answer...

Answer 2

For your DM2652 fridge cover the replacement is #DMC37FR for White and #DMC97FR for Black.

view full answer...

Answer 3

Really sorry to hear about the nightmare you are dealing with! Based on the dimensions and amount of screws you mentioned I don't believe we have exactly what you are looking for but maybe if you could get me more of the pictures you have I can…

view full answer...

Answer 4

Only one photo came through, but Dometic bought out that portion of Atwood. We have the Replacement Lid for Dometic Refrigerator Vents - Polar White #VM65528 which may fit your Atwood fridge. The overall dimensions are 27 inches by 10-3/4 inches with…

view full answer...

Answer 5

You'll want to use the amount of links that allows the tow vehicle to sit as close to level as possible. So in your case you'd want to use 6 links since you said that gives you the more level height. Since your weight distribution system is…

view full answer...

Answer 6

The Camco RV Refrigerator Vent Cover - Top Only #CAM42160 has a second set of mounting holes at 4-1/8" x 23-1/2". I recommend double checking the measurement you have to see if this cover will fit. If not you can replace the vent base and…

view full answer...

Answer 7

It sounds like you are looking for the Camco RV Refrigerator Vent Cover in Black #CAM42163 or White #CAM42160. This cover fits over a Dometic or Norcold refrigerator roof vent. We do have the Base in White #CAM42161 or Black #CAM42164 as well if that…

view full answer...

Answer 8

The Camco RV Refrigerator Vent Cover #CAM42160 is designed for Norcold refrigerator bases but I went out to our warehouse to take some measurements on the mounting holes for the cover so you can compare it the specific N841.3 model you have. There…

view full answer...

Answer 9

The installation hardware - including the mounting brackets - is included with the Camco RV Refrigerator Vent Cover - White #CAM42160 or Black #CAM42163. I have added a photo showing the mounting brackets along with the screws that you mentioned for…

view full answer...

Answer 10

For your Dometic RM2652 fridge we do not have a cover that fits the 21-1/2" x 4-1/4" screw holes you are looking for. The RV Refrigerator Roof Vent Cap and Base #DMC37FR (#DMC97FR for black) has screw hole measurements of 22" x…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Refrigerator Roof Vent Cover for a Dometic RM2611

Product Page this Question was Asked From

Continue Researching