Windshield Wiper Blade for 2015 Tiffin Allegro Open Road

Question

Question:

2015 Tiffin open road replacement wiper blades size?

asked by: Randyhurlbert

0

Expert Reply:

Your Tiffin 2015, Open Road model takes a 32" contoured blade wiper with a J-hook connector. I would recommend the ClearPlus # CP77321 replacement blade. This is a heavy duty wiper recommended for RV's, Transit Buses, and commercial trucks, and will be an excellent performer on your large contoured windshield due to its multiple pressure points. It also features bushings between metal connection points for quiet operation. These are sold in quantities of one so you may want to order two for both sides of the windshield.

I have attached a link to this product page and a demonstration video.

expert reply by: Les D

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

view full answer...

Answer 3

For your 2019 Winnebago Vista 29VE the correct wiper blades are the part#CP77321 for the driver side and passenger side. These are 32 inch long blades.

view full answer...

Answer 4

The SAE number you provided is merely an identifier that states that the lamp conforms to certain DOT regulations. The Glo-Brite 410 has been discontinued and is no longer available. The closest replacement we offer is the Optronics #MCL48AB which is…

view full answer...

Answer 5

Believe me when I tell you, of all the questions we get, this is definitely NOT a stupid one, and to answer your question, both the Timbren Rear Suspension Enhancement System #TFRF53A and Timbren Front Suspension Enhancement System #TFFF53B will fit…

view full answer...

Answer 6

Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend going with the Gen-Y #325-GH-8040 shock absorbing pin box versus a Trailair Flex Air like part #LC328492. The Trailair features a…

view full answer...

Answer 7

Manufacturers do not list the bolt patterns or any part numbers for pretty much anything when it comes to their trailers so you'll need to look for the serial number and RPO number that should be listed on your current pin box and we can use…

view full answer...

Answer 8

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 9

The manufacturer and model number of the pin box is usually printed on a sticker or stamped into a plate or directly into the metal of the pin box. If you can't find that, the manufacturer of your 5th wheel should be able to tell you which pin…

view full answer...

Windshield Wiper Blade for 2015 Tiffin Allegro Open Road

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching