Replacement Bearings For Toy Hauler Axle Hub
Question:
looking to replace the bearings on my toy hauler , the stamp on the axle reads 5pmss342160002237
asked by: Bill
Expert Reply:
I don't have any cross-reference for that stamp. To get your bearing replacements you will first want to check for any number on the hub/drum itself as we may be able to cross-reference that hub. If not, you will need to pull one hub and dismantle the hub to get the bearing numbers off the face of the inner and outer bearing and also the grease seal.
If you can't make out the numbers stamped on the face of the bearings and seal, then you can use a digital caliper like # PTW80157 to measure the inner and outer diameter of the bearings and seal and from those measurements we can help you get the correct replacements.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Availability of 5,200 lb Axle With Idler Hubs
- Article: Trailer Tire Sizing
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Replacement Bearings 2788 and 1779
- Q&A: Replacement Trailer Bearing for L44640
- Q&A: Idler Hub for Lippert 7k Axle that Has 6-Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a Trailer Axle and Spindle
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template