Replacement Motor for Single Speed Function on Ventline PR5 Range Hood

Question

Question:

Wanting to know which ventline replacement fan motor worked with the PR5 model 100 cfm. mine is only a single speed fan the blue wire they have disconnected an wire nutted

asked by: Justin

0

Expert Reply:

The Replacement Fan Motor for Ventline Range Hoods # BVD0278-00 will work well in the manner you stated. You can simply connect the ground wire and the power wire while wire nutting the 3rd wire for the same function. This simply will give you the single speed operation and not the two speed option but you can choose your speed based on the two wires. If is compatible with your PR5 vent hood.

expert reply by: Jason S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 5

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 6

it sounds like you are looking for a fan motor for a Ventline range hood. The correct replacement fan motor for your PR 100 CFM is going to be part #BVD0278-00. We also have the fan blade #BCD0409-00 if you are in need.

view full answer...

Answer 7

The Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 will definitely be the direct replacement for the Ventline PR-4 you are fixing, but the motor housing is not available separately, unfortunately. Below I have all the replacements parts…

view full answer...

Answer 8

Yes! The Replacement Fan Motor for Ventline Range Hoods part #BVD0278-00 is correct for your Ventline Range Hood PR-4. I was able to confirm this with my contact at Ventline. The replacement process is super easy according to our customers. There are…

view full answer...

Answer 9

Even though your motor has just two wires, you can still replace it with the three-wire motor from Ventline: - Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 The reason this motor has three wires is because it can be used for two-speed…

view full answer...

Answer 10

For the P series of Ventline fans, such as Model PH 4, the correct replacement fan motor is #BVD0278-00.

view full answer...

Answer 11

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 12

I believe I have a solution for you. It sounds like you need the Replacement Fan Motor for Ventline Range Hoods #BVD0278-00. This is a 2 speed fan motor designed to fit Ventline Range Hoods which is what it sounds like you have. This is pretty…

view full answer...

Replacement Motor for Single Speed Function on Ventline PR5 Range Hood

Product Page this Question was Asked From

Continue Researching