How to Set Time on Jensen Mechless RV Stereo

Question

Question:

How to set the time on the Jensen mechless rv unit?

asked by: Dave L

0

Expert Reply:

I pulled up the install instructions for the Jensen Mechless Stereo part # JWM20 and here's how the clock is adjusted:

Time Menu Setup
Press & Hold the TIME button (7) to access time menu settings. Press the TIME
button (7) repeatedly to adjust the following time menu list: ALARM (ON/OFF),
ALARM SET, SLEEP TIMER and CLOCK SET. Use the or buttons (12, 11)
to choose a value for each setting.

Time Settings Adjustment
ALARM (ON/OFF): To turn the alarm function on or off.
ALARM SET: The hour and minutes clock digit will flash. Press the button
(11) to adjust hour or press the button (12) to adjust minute.
SLEEP TIMER: Select the sleep time from 0 (OFF), 15, 30, 45 or 60 minutes.
The sleep timer will automatically turn off the JWM20 in designated number
of minutes.
TIME SET: The hour and minutes clock digit will flash. Press the button
(11) to adjust hour or press the button (12) to adjust minute.

expert reply by: Jameson C

0

Answer 1

I am happy to help you set the clock on your Jensen Stereo part #JWM60A. If you press and hold the hour and minute button then numbers representing the hour and minutes should flash. If you see a flash then you know the stereo is in clock set up…

view full answer...

Answer 2

To set the clock of your Jensen RV stereo part #JWM45 you'll need to first turn on Power, then press the View button so that the clock/time is displayed. Then press either MIN or HR button not both until the time flashes. You may then press…

view full answer...

Answer 3

If the volume and display suddenly stopped working on your Jensen model AWM910 Stereo then most likely it experienced a small electrical surge that caused the system to lock up. In this case a simple resetting of the unit should resolve the issue…

view full answer...

Answer 4

Here's what the manual states for setting the clock of the Jensen stereo #JWM90A: Press the Clock button (27) to access clock set up mode. The hour clock digit will flash, Rotate the VOL/ENTER knob clockwise or counter-clockwise to adjust…

view full answer...

Answer 5

As you mentioned, this is normally the accessory battery draining the starting battery (tow vehicle) and most of our products like the Battery Isolation Solenoid, Item #PK5231201, are focused on preventing this situation. It is possible to set this…

view full answer...

Answer 6

A trailer mounted battery is typically maintained by the 12-volt accessory circuit from the 7-way trailer connector. If the accessory circuit on your 7-way is live even when the ignition is shut off, it is possible that the battery on your truck…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Sure thing; the JRV9000R is a double-din stereo so you can replace it with another double din, and for that I recommend the Jensen RV Stereo w/ DVD Player #JWM45. The #JWM45 is a 48 watt stereo that also has the DVD functionality and will fit in…

view full answer...

How to Set Time on Jensen Mechless RV Stereo

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching