Grounding the Yellow Wire While Syncing the Replacement Remote for WirelessONE Air Lift Compressor
Question:
Is there youtube video showing how to do this. I found the yellow wire and fuse. No idea where the grounding wire is? Hepl
asked by: Joe L
Expert Reply:
The instructions you viewed for syncing the Replacement Remote for Air Lift WirelessONE, part # AL72704, were thus:
1. Turn ignition on.
2. Locate the sync wire in the wire harness.It will be the yellow wire that is looped with a yellow cap around it.
3. Remove the yellow wire from the cap leaving the cap attached to the harness.
4. Disconnect power to the receiver. Unplug the connector on the top.
5. Connect power to the receiver while grounding the sync input.
6. Listen for 3 clicks of the internal solenoid, then one click every second. This will indicate that you are now in the sync mode. Sync mode will last for 30 seconds total. Within the 30 seconds press any button on the transmitter to send a message to the receiver. Once the receiver has received a message it will sync with that transmitter and stop
clicking the solenoid in 1 second intervals.
7. Reinsert the yellow wire terminal into the molded cap.
The "grounding" mentioned in step 5 is not a wire. This means you need to touch the yellow wire to the metal surface of your 2015 Chevrolet Tahoe, which "grounds the wire out." Make sure this is a clean metal contact on the frame of your vehicle.
Product Page this Question was Asked From
Replacement Remote for Air Lift WirelessONE Compressor System for Air Helper Springs
- Accessories and Parts
- Air Suspension Compressor Kit
- Vehicle Suspension
- Remote Control
- Air Lift
more information >
Continue Researching
- Q&A: How Do I Ground the Yellow Wire to Pair/Sync My Remote with Air Lift WirelessONE Compressor
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Q&A: How Do You Set the Air Lift Wireless Controller To JOIN Mode?
- Video: Trailer Axle Replacement
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Video: Air Lift Vehicle Suspension AL72704 Review
- Shop: TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions - Tandem Axle - 16K - Qty 4
- Q&A: Recommendation for Replacing Trailer Leaf Springs
- Q&A: Replacement Air Lift Wireless Remote For 1st Gen Manifolds
- Shop: Tonneau Cover
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Q&A: The LCD Display on the Air Lift WirelessAir Remote is not Working Properly
- Q&A: How To Pair an Air Lift WirelessAIR Remote to Compressor
- Video: Air Lift WirelessONE Compressor System Remote Control Replacement Review
- Shop: Replacement Remote Control for Air Lift WirelessONE Compressor System
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/8" Long
- Search Results: airlift wireless one
- Search Results: schrader valve
- Search Results: al25870
- Shop: Replacement Remote for Air Lift WirelessONE Compressor System for Air Helper Springs
- Shop: Cold Air Intake
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: Aries AdvantEdge Headache Rack Review
- Shop: Trailer Wiring
- Search Results: 68149
on Accessories and Parts
