Westin Bull Bar Brackets for 2004 Toyota Tundra

Question

Question:

I need brackets for an 04 tundra

asked by: Boyd R

0

Expert Reply:

The Westin Bull Bar brackets you need for a 2004 Toyota Tundra is the part # 32-136PK.

expert reply by: Jameson C

0

Answer 1

Unless your bull bar is the Westin #32-1175, I can't guarantee that the #32-117PK will be compatible. Not only are the bracket kits vehicle specific, but the bull bars themselves are as well. So, unless your bull bar is without a doubt a Westin…

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 3

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 4

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 5

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 6

On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as…

view full answer...

Answer 7

That is correct, the Custom Underbed Installation Kit, #BWGNRK1067-5W, installs by using existing holes in the frame of your 2007 GMC 2500HD Classic so there is no drilling required to install the frame brackets. This installation kit is designed for…

view full answer...

Answer 8

The hub/drum you sent in a picture of is a Lippert 8,000 lb axle hub with an 8 on 6-1/2 inch bolt pattern designed for oil-bath applications. The correct replacement then is the #8-285-10UC3-A.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Westin Bull Bar Brackets for 2004 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching