bing tracking image
Q & A Icon

Torque Specs for the Firestone Ride-Rite Air Helper Springs Part # F2558  

Question:

Hi there, I am installing this kit #2558 this weekend, and I am looking for clarification on the torque specifications. Referencing Table A All torque specificationsinch in the trouble shooting guide, which torque specs should I use for the following? 1. The 5/8inch Nylon jam used to connect the upper bracket to the air spring? 2. The 3/8inch hex bolt used to connect the lower bracket to the air spring? 3. The 3/8inch hex nuts used to tighten down the straight carriage bolts? 4. The 3/8inch hex nuts used to tighten down the square Bail Clamps? Would these specs be correct?: 1. 15-20 ft lbs 2. 15-20 ft lbs 3. 28-32 ft lbs 4. 28-32 ft lbs Thank for the help!

0

Expert Reply:

Good question. Let's clear it up. On the Firestone Ride-Rite Air Helper Springs part # F2558 they are as follows.

1. The 5/8inch Nylon jam used to connect the upper bracket to the air spring? 15-20 ft/lb.

2. The 3/8inch hex bolt used to connect the lower bracket to the air spring? 15-20 ft/lb.

3. The 3/8inch hex nuts used to tighten down the straight carriage bolts? 10-15 ft/lb.

4. The 3/8inch hex nuts used to tighten down the square Bail Clamps? 28-32 ft/lb.

I have also linked an installation video on a 2016 for you to check out.

expert reply by:
0
Randy B

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>