Replacement Hub and Spindle for 2" Square Axle with 3500-lbs Capacity
Question:
I have a 2003 four winns trailer with a tandem axle. I lost the bearings on the rear brake axil resulting with the spindle and hub being shot on one side. Im looking for a 3500#, 5 on 4 1/2 hub, but the rotor measures 11inch across. Im also hoping to find a replacement spindle that I can weld on to the existing axle. The axle is 2inch square tubing but any can be machined to fit. Bearings are L68149 and L44649. Can you help?
asked by: Russ S
Expert Reply:
To start, you could use the #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter # TRU24FR to replace your damaged spindle; this spindle will accept the same # L68149 and # L44649 bearings that were on your old hubs.
When it comes to hubs and rotors that are 11" diameter, we don't have anything that matches that but you could easily just replace both sides so you've got brake rotors and hubs that are brand new on both sides. For this you can use the Kodiak # KHR10D you were looking at, which use the # L68149 and # L44649 bearings and have a 5 on 4-1/2" bolt pattern.
I've linked some review videos of these parts for you to have a look at, as well.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc Brakes
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Replacement Oil Seal for AL-KO 568303
- Article: Trailer Wiring Diagrams
- Q&A: Cross Reference For Disc Brakes for Trailer Based on Automotive Applications
- Article: Stability Control for Heavy Duty Vehicles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Where to Position the Trailer Axle?