Offset Gooseneck Hitch Ball for B&W Turnoverball on 2019 Ram 2500

Question

Question:

Hello, Which B& W 4 inch gooseneck ball extender will I need to use for my 2019 Ram 2500 with the turnover B&W Gooseneck hitch? Thanks

asked by: Ed

0

Expert Reply:

We do have the correct 4" offset ball for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1320 that fits your 2019 Ram 2500.

The correct offset ball is the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches # BWGNXA4085.

expert reply by: Kyle S

0

Answer 1

I may have an option for you, but the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w/8" Offset for Short-Bed Trucks #AM3139 you were looking at will only give you a total of 8" offset. Combined with your orginal…

view full answer...

Answer 2

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

view full answer...

Answer 3

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Adapter Pin Box part #325-GH-8045 is an excellent option to replace an existing pin box as it allows for a clean truck bed and it would be much easier to couple. The built-in cushioning is also…

view full answer...

Answer 4

Here's the formula to use to determine if you have enough clearance to make a 90 degree turn with a gooseneck hitch installed: (A + B) - C = Clearance A = Distance from the gooseneck ball to the truck cab B = Offset used C = Width of the nose…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 8

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 9

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 10

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...