How To Upgrade Air Lift LoadLifter 5000 Air Helper Springs to Ultimate on a 2016 Ford F-150

Question

Question:

I have a 2016 F150 4wd with Air Lift kit 57385 Load Lifter 5000. However, I want to the jounced air bags into that kit. I have been give part 82493 as the proper bag to use. Is this correct?

asked by: Chris V

0

Expert Reply:

The Air Lift LoadLifter 5000 Air Helper Springs part # AL57385 which are for a 2016 Ford F-150 can be upgraded to the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part # AL88385 with the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System part # AL84290 (Same As 57385).

expert reply by: Conner L

0

Answer 1

For your 2017 Ram 2500 Tradesman, the best option for air bags is going to be the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88289. These Air Lift springs have a 5,000 lbs load leveling capacity. The…

view full answer...

Answer 2

The diameter of the air bag that comes with the Air Lift kit part #AL88275 that you referenced is 5-3/4 inches.

view full answer...

Answer 3

The correct replacement air spring for the Air Lift LoadLifter 5000 Ultimate Air Helper Spring Kit part #AL88228 that you have on your 2013 Ford F-150 is the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System part #AL84201.

view full answer...

Answer 4

It is possible that the air bag is bad in your Air Lift LoadLifter 5000 Ultimate Plus Air Springs #AL89295. Before replacing the airbag I would recommend ensuring that the connectors are in good working order and are tight. Also check that the air…

view full answer...

Answer 5

The Air Lift LoadLifter 5000 Air Helper Springs #AL57204 air bags have a designed height of 6". This is the distance that you will want in between your mounting flanges. I recommend using the Air Lift Compressor System #AL74000EZ as this has a…

view full answer...

Answer 6

Since you have a Workhorse W22 Chassis you should have the Air Lift LoadLifter 5000 Ultimate System #AL88202 which would mean you need the Replacement Air Spring for Air Lift LoadLifter 5000 Ultimate System - Rear Axle #AL84201 to replace the…

view full answer...

Answer 7

With the Air Lift LoadLifter 5000 kit part #AL57375 that fits your 2022 Ram 1500 that has a 3.5 inch lift kit what you'd need is the lift spacer kit part #AL52440 which takes up the space created by the lift kit so that the bags engage like they…

view full answer...

Answer 8

The Air Lift Air Spring #AL50236 has what they call a design height of 7". There are 3 different height bags (5.5", 6" and 7") and they are determined by the number stamped on the side of the bag. The bags that come in the Air…

view full answer...

Answer 9

The Air Lift suspension enhancement kit spring part #AL84201 that you referenced is a replacement spring and would not be an entire kit like you would need for your 2002 Chevy Silverado 3500 dually. For that you would want the part #AL57275 as it is…

view full answer...

Answer 10

The air bags in the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88396 have a 6" design height. This is the height that the bag is recommended to be when there is no additional weight on the suspension. The additional 1-1/2"…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

How To Upgrade Air Lift LoadLifter 5000 Air Helper Springs to Ultimate on a 2016 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching