Hitch Fit for 2013 Nissan Rogue
Question:
HI , Im excited about ordering the hitch receiver for my 2013 Nissan rogue. I order one already and it happen that it was too short. this time i want to make sure Ill order the correct one. what is the hitch measurement from one bolt hole from the passengers side to the bolt hole to the drivers side. I measured my nissan and from the one hole to the hole on the other side , it measures about 42.5 inches. I will appreciate your response. thanks
asked by: EFRAIN S
Helpful Expert Reply:
The Curt Class III hitch, part # C13204 is a confirmed fir for your 2013 Nissan Rogue. The side to side hole spacing, center hole to center hole is 42-1/2 inches, as shown in the provided photo. I've linked to an installation video that you might find helpful.
If you'll be towing with your hitch, you'll need a few other items to complete your setup. For a trailer wiring harness, use # 118480. For a ball mount, use # D-28 and # PC3 for a hitch pin. For a trailer ball, use # 19260 for a 1-7/8 inch or # 63845 for a 2 inch ball.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Aero Bar Roof Rack that Fits 2022 Toyota Highlander
- Q&A: Recommended Trailer Hitch for 2017 Nissan Rogue
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Connecting Wiring Harness to Battery of 2018 Toyota RAV4 Hybrid
- Q&A: Recommended Wiring Kit for Towing with a 2017 Toyota RAV4
- Q&A: Troubleshooting Failed Hopkins Powered Taillight Converter 46255 in 2013 Toyota RAV4
- Q&A: Is the Curt Trailer Hitch Receiver Fascia Trim Diagram Correct for 2022 Ford Bronco Sport
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: 7 Common Questions Everyone Has About Trailer Tires