Backup Camera/Mirror Options for 2008 F250

Question

Question:

I am looking to replace my broken rearview mirror in my 2008 F250 with a mirror featuring a backup camera. The truck did not come with a navigation system, only the autodimming rearview mirror. I am not sure if I can do this or not. Any suggestions or help is greatly appreciated.

asked by: Chuck

0

Expert Reply:

GCH Automotive systems offer a camera system that places the monitor in a replacement rearview mirror which sounds like a perfect option for you. The camera included with the # 3460009 system is specifically designed to install using the 3rd brake light/truck bed lamp bezel on the back of the truck cab above the rear window. Once installed, it'll serve as both a back up camera, but will also come in very handy for lining things up correctly if you have an in-bed gooseneck or fifth wheel hitch.

The Rear View Safety # RVS-772718 also uses a replacement rear view mirror as the monitor, but the camera mounts on the bumper next to the license plate. If you have a bumper hitch trailer, this can come in handy but the camera is fairly vulnerable to damage in the bumper area (most folks who have bumper tow trailers have bashed in their licence plate at least once with the trailer coupler). You'll also need to drill a hole through the bumper to mount the camera.

Between the two options, I'd personally choose the # 3460009. I've linked to some product videos for both systems.

expert reply by: Mike L

0

Answer 1

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 2

The Rear View Safety Backup Camera System with Flush Mount Camera #RVS-7707721 can be connected to be always on as a rear view monitor option. Because you are looking to replace your rear view mirror, you may want to consider the Rear View Safety…

view full answer...

Answer 3

Since you can use basically any trigger circuit for the Rear View Safety Backup Camera system part #RVS-772718 you would not have to use the reverse light circuit and you could run it to a circuit that comes on with the ignition so that it is active…

view full answer...

Answer 4

The Rear View Safety Wireless License Plate Backup Camera System part #RVS-5350-W will cover up the word "Texas" at the top of your license plate from my research. Since you are concerned with blocking the license plate, I recommend Rear…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Backup Camera/Mirror Options for 2008 F250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching