Is Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly # DM97FR Plastic with Bracing

Question

Question:

Is it plastic like the old orginals? Does it come with the metal bracing as mine was distorted with a blowout

asked by: Lynn

0

Expert Reply:

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly # DM97FR that you referenced is made from the same construction as what your dolly had on it originally. The main portion of the fender is plastic and there is a metal bracing on the underside as well.

expert reply by: Jameson C

0

Answer 1

I was able to find the correct fenders for your Demco Tow-it 2 tow dolly, as the Replacement Fender #DM97FR will not fit your Tow-it 2. Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 2

While the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM97FR and the Replacement Fender Assembly for Demco Kar Kaddy SS Tow Dolly #DR74FR are very similar they are not quite the same and you would not want to use the Replacement…

view full answer...

Answer 3

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly #DM97FR that you referenced actually uses the same bullet style connectors that I can see in your attached picture so in that regard it would install very easily as it would connect…

view full answer...

Answer 4

I have another option for you, but the Demco Replacement Fender #DM27FR you were looking at is only confirmed to fit the Demco Kar Kaddy SS and 3, and will not fit your Demco Kar Kaddy X #DM9713093. Instead you will need Replacement Fender- Driver…

view full answer...

Answer 5

The Replacement Fender Assembly for Demco Kar Kaddy Tow Dolly - Passenger Side #DM27FR does include the steel mounting plate underneath the fender assembly. I have linked a picture showing the mounting plate on the fender.

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Is Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly # DM97FR Plastic with Bracing

Product Page this Question was Asked From

Continue Researching