Does VueSMART RV and Trailer Backup Camera Mount to Bracket

Question

Question:

Can this camera mount to existing an Furion bracket that came prewired prepped on my RV?

asked by: Darryl

0

Expert Reply:

The VueSMART RV and Trailer Backup Camera # HM34FR will not mount to a Furrion bracket. The camera has its own bracket that can mount to an existing trailer light, or you can hard mount it by screwing in the bottom portion of the bracket to your trailer.

I have added a link to a video review for you as well of the VueSMART RV and Trailer Backup Camera # HM34FR.

expert reply by: Kyle S

0

click to enlarge

Answer 1

For your 2020 Rockwood 5th Wheel, there aren't many options for an air ride pin box that is compatible to replace your current turning point pin box. I recommend Item #LC328492 which has an 18,000lb towing capacity and is the closest to your…

view full answer...

Answer 2

The camera part #HM34FR won't fit exactly in place of the mount you have but it will still install reasonably easy. It will require you to attach it to the rear wall of the trailer directly using mounting hardware that's included. It…

view full answer...

Answer 3

Even though your Jayco TT is pre-wired for a Furrion backup camera system, you could technically splice into the wiring and install something like the VueSMART Universal Mount #HM34FR. You would either cut the Furrion plug off and wire in the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hello John. The mounting bolt holes on the CargoSmart D-Ring Tie-Down Anchors #3481764 are 1/4" in diameter.

view full answer...

Answer 7

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp on…

view full answer...

Answer 8

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 9

Yes, I can and congrats on the new truck! To add a hitch to your 2024 Toyota Tundra, I recommend the Curt item #C44BR. This hitch is custom fit and bolts to your Tundra with included hardware. The Curt item #C44BR is a class IV hitch with a 2"…

view full answer...

Answer 10

Jounce springs will sit on the frame and come into contact with the axle as the suspension compresses. Typically the vehicle manufacturer will place a rubber-type material here to prevent the harsh bump between these two components when heavily…

view full answer...

Answer 11

I do have an option for you Trevor but there is not a custom fit 7-Way harness available for the 2020 Subaru Outback Wagon. You will need to convert Tekonsha 4-Pole flat trailer connector part #118467 to a 7-way connector with part #ETBC7. The…

view full answer...

Does VueSMART RV and Trailer Backup Camera Mount to Bracket

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching