Does Mighty Cord 50 amp to 30 amp Adapter Change Amperage or Just Connectors

Question

Question:

If I connect this adaptor to my 30 amp/ 240volt 4 prong outlet on my generator, will it give me 50 amps to the RV or just 30 amp? Thanks

asked by: Michael B

0

Expert Reply:

Since you'd be connecting the # A10-G30450VP to a 30 amp power source it would only give your RV 30 amps. It adapts the connector style to what a normal 50 amp circuit uses but would only supply it with 30 amps.

expert reply by: Jameson C

0

Answer 1

It sounds like you are looking for the Mighty Cord Generator Adapter for RV Power Cord #A10-G30450VP which has a 4 prong 30 amp male twist lock plug and a 4 prong 50 amp standard female plug. This adapter is 12" long and is designed to allow you…

view full answer...

Answer 2

Your generators have a floating neutral so that's why you're receiving the open ground error. The solution to this is to plug the Hughes Autoformers Ground Neutral Bonded Plug for Generators #HU33FR into an open 15 amp outlet on the…

view full answer...

Answer 3

In the Mighty Cord Generator Adapter for RV Power Cord #A10-G30450VP that you referenced there are 6 and 8 gauge wires used. The big difference between this and the Camco part #CAM55422 that you would notice is the handle that the Camco has on the…

view full answer...

Answer 4

You are exactly right when you mentioned an overall diameter on your ST225/75R15 tire of just under 28.3 inches. With this size tire, I recommend going with a 29 inch cover like the Adco Ultra Tyre Guard RV Wheel Covers - Black #290-3973. These…

view full answer...

Answer 5

We do not have a wiring diagram available but I did reach out to my contact at Mighty Cord and was able to verify that both the hot legs on the Generator Adapter #A10-G30450VP are fed from the 30 amp side of the adapter. I have attached a short video…

view full answer...

Answer 6

We do have an adapter cord that will work for the 30 amp twist lock receptacle and the 50 amp plug. It is the Mighty Cord Generator Adapter #A10-G30450VP. I have linked a video review of this adapter for you.

view full answer...

Answer 7

Using the Honda generator to power your RV is a great idea. You can use either outlet to power your RV. For any appliances that use less than 125V of power, I would recommend you use the 3 prong 30 amp outlet with a 50 amp adapter like the Camco…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does Mighty Cord 50 amp to 30 amp Adapter Change Amperage or Just Connectors

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching