Tail Light Converter Recommendation for a Motorhome with Separate Tail Lights

Question:

On my motor home my brake lights work separately from my turn lights . how can I my the brakes lights work . The turn works right.

asked by: Lionel W

Expert Reply:

It sounds like you have separate tail lights on your motor home. Meaning that the stop/tail lights are not on the same bulb as the turn signals, and that your current wiring is set up for combined tail light wiring.

We have a converter that will need to install onto the wiring of your motorhome so that the signal will be split appropriately. You would want a Vehicle to Vehicle Taillight Converter # 118158.

To wire it in you will need to take the right turn/stop circuit and run it to the green wire of the input side of the converter. Ground the white wire, and then run the left turn/stop signal to the yellow wire. On the output side you will need to run the right turn of your trailer to the green wire of the converter, the stop light circuit to the red wire, and the left turn to the yellow wire.

expert reply by: Jameson C